homemaker-layout/tests/test_circulation_proportion.py

163 lines
6.7 KiB
Python
Raw Normal View History

A corridor may be corridor-shaped: no aspect cap on circulation Owner's ruling: "there should be no cap on the proportion of a corridor, especially for big buildings, the crinkliness rule is there to prevent these becoming unpleasant spaces." proportion_circulation was [1.5, 0.5], failing a corridor above aspect 2.57 -- at the 1.97 m minimum width the width factor allows, a corridor 5.1 m long; at the 2.4 m target width, 6.2 m. The corpus shows the consequence: median circulation leaf 14.3 m2 at aspect 1.67, a stubby room rather than a corridor. The justification checks out arithmetically. The unpleasant space the cap was standing in for is a long BURIED corridor -- and crinkliness already sends that to zero, since a buried leaf has crink == 0. A long corridor along a facade scores 0.90. Aspect cannot tell those two apart; crinkliness can, so the cap was duplicating a rule that already exists and does the job better. Shipped: proportion_circulation = None (no aspect requirement). quality_proportion returns 1.0 for circulation, and shapecurve.leaf_constraints yields rmax = inf so the DP agrees with the fitness instead of pruning topologies the objective would accept. A habitable room's aspect target is untouched. The narrow side still holds -- width_circulation keeps a corridor >= 1.97 m, and "edge too long" still caps a single wall at 8 m. Unlike 39.14/39.18/39.19 this DOES change the fail set, which is the point. Across the twelve baseline artefacts it removes exactly 7 corridor proportion fails and adds none: harbor 33/43/42 -> 33/42/40, maple 54/73/55 -> 54/71/54, health-centre 4/9/5 -> 3/9/5, programme-house unchanged. Also recorded in 39.22, and a retraction: hxi was titled "search is rewarded for deleting the circulation spine", which 39.8 had already measured and refuted -- 0 of the 7 connectivity-breaking deletions sampled were rewarded. My own earlier comment on the bead restated that retracted claim; corrected, and the bead retitled. What binds next: removing the cap roughly doubles a corridor leaf's reach, from proportion at ~6.2 m to size_circulation at 12.5 m (2.4 m wide hits the 30 m2 fail edge there). size_circulation's target area is ZERO, the other half of the double-charge -- circulation priced as overhead once in value_circulation = 50 and again in a size factor whose optimum is non-existence. Not changed: it is a distinct parameter with its own rationale, unruled, and 39.16 is a standing reminder about inherited constants. 415 passed. Refs homemaker-py-hxi. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
2026-09-06 12:56:39 +00:00
"""Corridors have no aspect requirement (homemaker-py-hxi, DESIGN.md §39.22).
Owner's ruling: "there should be no cap on the proportion of a corridor,
especially for big buildings, the crinkliness rule is there to prevent these
becoming unpleasant spaces."
The tests below pin both halves of that the cap is gone, AND crinkliness
still does the job the cap was wrongly doing, so removing it did not leave
long buried corridors unpunished.
"""
from __future__ import annotations
import copy
import math
from pathlib import Path
import pytest
from homemaker_layout import dom as dom_mod
from homemaker_layout.fitness import (
CONF_DEFAULTS, FAIL_THRESHOLD, Fitness, gaussian, load_config,
)
EXAMPLES = Path(__file__).resolve().parent.parent / "examples"
pytestmark = pytest.mark.skipif(not (EXAMPLES / "harbor-house").is_dir(),
reason="examples absent")
def _fit(**ov):
conf, cost = load_config(EXAMPLES / "harbor-house", overrides=ov)
return Fitness(conf, cost)
def test_there_is_no_corridor_aspect_requirement():
assert CONF_DEFAULTS["proportion_circulation"] is None
fit = _fit()
assert dom_mod.is_circulation(dom_mod.Node(type="C"))
# any aspect at all scores 1.0 -- checked through the real code path
for aspect in (1.0, 3.0, 12.0, 40.0):
fit_leaf = dom_mod.Node(
type="C", node=[[0.0, 0.0], [aspect, 0.0], [aspect, 1.0], [0.0, 1.0]])
assert fit.quality_proportion(fit_leaf) == 1.0, aspect
def test_a_room_still_has_one():
"""The ruling is about corridors. A habitable room's aspect target stands."""
fit = _fit()
room = dom_mod.Node(type="r", node=[[0.0, 0.0], [12.0, 0.0], [12.0, 1.0], [0.0, 1.0]])
assert fit.quality_proportion(room) < FAIL_THRESHOLD
def test_crinkliness_is_what_punishes_an_unpleasant_corridor():
"""The ruling's own justification, as arithmetic.
A long BURIED corridor is exactly the unpleasant space the aspect cap was
being used to prevent; crinkliness sends it to zero. A long corridor along
a facade is a perfectly good corridor, and crinkliness likes it.
"""
target, sigma = CONF_DEFAULTS["uncrinkliness_circulation"]
h, width, length = 3.0, 2.4, 30.0
area = width * length
buried = 0.0 # no illuminated wall at all
assert buried == 0.0
lit_one_side = (length * h) / area # the long wall is a facade
q = gaussian(1.0 / lit_one_side, 1.0, target, sigma)
assert q > 0.85, "a daylit corridor along a facade should score well"
def test_removing_the_cap_only_ever_removes_proportion_fails():
"""It cannot introduce a failure, and it touches nothing but corridors."""
old = {"proportion_circulation": [1.5, 0.5]}
seen = 0
for name in ("harbor-house", "maple-court", "health-centre", "programme-house"):
d = EXAMPLES / name
for p in sorted(d.glob("coldstart-500000-s*.dom")):
root = dom_mod.load(str(p))
c_old, cost = load_config(d, overrides=old)
c_new, _ = load_config(d)
_, f_old = Fitness(c_old, cost).score_with_fails(copy.deepcopy(root))
_, f_new = Fitness(c_new, cost).score_with_fails(copy.deepcopy(root))
assert not (set(f_new) - set(f_old)), "must not add a failure"
assert all(f.endswith(" proportion") for f in set(f_old) - set(f_new))
seen += 1
assert seen >= 4
def test_the_shape_curve_dp_accepts_an_unbounded_aspect():
"""`leaf_constraints` feeds rmax into the DP; None must become inf, not crash
and not silently fall back to a finite cap."""
from homemaker_layout import shapecurve
fit = _fit()
leaf = dom_mod.Node(type="C", node=[[0.0, 0.0], [4.0, 0.0], [4.0, 4.0], [0.0, 4.0]])
assert math.isinf(shapecurve.leaf_constraints(fit, leaf).rmax)
No size cap on circulation: twice the corridor is twice as bad, and no worse Owner's ruling: "as long as circulation is more expensive to build than it has value then we have a linear ramp. a gaussian ramp is probably not appropriate here as double the amount of corridor is simply twice as bad, so it should score the same as two half size corridors". Both halves check out. The linear ramp is already there -- value_circulation 50 against a build cost of 200, so every m2 of corridor is worth -150 and the objective pushes for less of it without needing a cap. And the AMOUNT of circulation is separately governed at building level by ratio_circulation [0.00, 0.20], a gaussian on the circulation fraction, which is where that question belongs. The per-leaf size gaussian was a third charge on the same thing. It was also the only one of the three that depended on how the corridor was cut up. One 20 m2 corridor scored gaussian(20,0,14) = 0.360 and contributed 360; two 10 m2 halves scored 0.775 each and contributed 775 between them. Splitting a corridor in half multiplied its value by 2.15x -- an artefact of where the tree happened to cut, rewarding the search for fragmenting its own spine. The ruling's test (one 2A leaf must score as two A leaves) is exactly what a gaussian on an amount cannot satisfy, and is now a test. size_circulation = None; quality_size returns 1.0 for circulation and shapecurve gives amin, amax = 0, inf. BUG this exposed: get_space_params falls through to a habitable default when a generic family key is missing and could not tell "missing" from "present but null", so a corridor silently inherited a room's 16 m2 size target. _generic_param now returns (found, value); pinned by a test. The same trap applied to 39.22's proportion_circulation. Fail-set effect of 39.22 and 39.23 together: 16 corridor size fails and 7 proportion fails removed, none added. harbor 33/43/42 -> 32/40/38, maple 54/73/55 -> 51/65/52, health-centre 4/9/5 -> 3/9/5, programme-house unchanged. The layouts are identical -- these are failures the objective should never have been reporting. Two shape-curve tests moved fixture: both built an infeasible upper storey from a 'C' leaf, infeasible precisely because of the bounds now removed. The fixture is a cr1 leaf, whose infeasibility is a contradiction between two of its own bounds (needs >= 180 m2 for its aspect bound, <= 101.5 m2 for its size bound across the box's fixed 23.52 m span) rather than a tight fit. The invariants they test are unchanged. Left open on hxi: the rate gap, value_circulation 50 against value_inside 300 on identical build cost. Whether a corridor is worth a sixth of a room per m2 is a design judgement, and the linear ramp is only as steep as that number. 419 passed. Refs homemaker-py-hxi. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
2026-09-06 15:01:12 +00:00
# --------------------------------------------------------------------------- #
# No size requirement either (homemaker-py-hxi, DESIGN.md §39.23)
# --------------------------------------------------------------------------- #
def test_there_is_no_corridor_size_requirement():
assert CONF_DEFAULTS["size_circulation"] is None
fit = _fit()
for area in (5.0, 14.0, 30.0, 60.0, 200.0):
leaf = dom_mod.Node(
type="C", node=[[0.0, 0.0], [area, 0.0], [area, 1.0], [0.0, 1.0]])
assert fit.quality_size(leaf) == 1.0, area
def test_a_corridor_does_not_inherit_a_rooms_size_target():
"""`get_space_params` falls through to a habitable default when a generic
family key is missing. A key that is present but null must not fall
through -- or a corridor silently acquires a 16 m2 target."""
fit = _fit()
assert fit.get_space_params("C", "size") is None
assert fit.get_space_params("C", "proportion") is None
assert fit.get_space_params("C", "width") == CONF_DEFAULTS["width_circulation"]
def test_twice_the_corridor_is_exactly_twice_as_bad():
"""The owner's argument, as arithmetic.
"double the amount of corridor is simply twice as bad, so it should score
the same as two half size corridors". Under a gaussian on area that was
false -- splitting a corridor in two raised its total value, which is a
pure artefact of how the tree happens to be cut. Value must be linear in
corridor area, so that one 2A leaf and two A leaves contribute the same.
"""
fit = _fit()
rate = fit.conf("value_circulation")
def value(area):
leaf = dom_mod.Node(
type="C", node=[[0.0, 0.0], [area, 0.0], [area, 1.0], [0.0, 1.0]])
return fit.quality_size(leaf) * rate * area
assert value(20.0) == pytest.approx(2 * value(10.0))
assert value(60.0) == pytest.approx(6 * value(10.0))
# and under the old gaussian it was not -- this is what changed.
# One 20 m2 corridor scored gaussian(20) = 0.360, two 10 m2 halves
# gaussian(10) = 0.775 each, so merely cutting the same corridor in two
# multiplied its value by 2.15x.
old_whole = gaussian(20.0, 1.0, 0.0, 14.0) * rate * 20.0
old_halves = 2 * (gaussian(10.0, 1.0, 0.0, 14.0) * rate * 10.0)
assert old_halves / old_whole == pytest.approx(2.15, abs=0.02), (
"the old gaussian rewarded splitting a corridor; if that is no longer "
"so, §39.23's justification needs revisiting")
def test_the_amount_of_circulation_is_still_priced():
"""Removing the per-leaf cap must not make corridors free. Two charges
remain, and they are the ones that do not depend on how it is cut up."""
fit = _fit()
assert fit.conf("value_circulation") < fit.cost("inside"), (
"a corridor must cost more to build than it is worth, or there is no "
"linear ramp pushing the search to use less of it")
assert fit.conf("ratio_circulation") is not None, (
"the building-level circulation fraction check is the other charge"
)