diff --git a/.beads/issues.jsonl b/.beads/issues.jsonl
index 5368966..847debb 100644
--- a/.beads/issues.jsonl
+++ b/.beads/issues.jsonl
@@ -70,21 +70,22 @@
 {"id":"homemaker-py-erc.6","title":"Experiment: inner-loop slack-expansion objective term","description":"Inner-loop counterpart to plot-fill construction. If Diagnostic B shows the inner loop has room to expand leaves into slack but no objective gradient to do so (the scalar rewards hitting target area but not exceeding it where slack exists), add a term/incentive so the ratio optimiser pushes leaf boundaries out to consume neighbouring slack and satisfy size, rather than parking at target.\n\nCONDITIONAL on Diagnostic B: build this only if B localizes the gap to the inner loop (room to expand, no gradient); if B shows construction targets too-small dims, prefer the plot-fill construction sibling. Must preserve the §5.4 inner-loop cliff / §4.9 lexicographic protection — the term sits where it cannot displace the fail-count ordering. A/B vs §12.2 baseline, seeds 0/1/2, 20000 evals, staged, default-OFF. Record DESIGN.md §13.6.","notes":"DEPRIORITISED by Diagnostic B (§13.2). B shows the inner loop CANNOT repair undersize: the slack is depth-driven maldistribution baked into the frozen topology, and the equal-offset ratio DOF cannot shrink a 14x leaf to feed a starved one without trading into shape fails (0.5^n cliff). Wrong DOF and wrong direction — the blocker is slicing POSITION, not a missing expansion reward. Fix belongs upstream in construction/topology (erc.4 re-scoped, erc.3). Keep as a low-priority follow-up only if a depth-balanced construction still leaves a residual size gradient the inner loop could pick up.","status":"closed","priority":4,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-22T23:16:24Z","created_by":"Bruno Postle","updated_at":"2026-06-28T13:22:22Z","closed_at":"2026-06-28T13:22:22Z","close_reason":"wont-fix (DESIGN §13.7): Diag B (§13.2) showed the inner loop cannot repair undersize (wrong DOF — slicing position, frozen-topology ratios). Superseded by depth-balanced construction (erc.4). Condition unmet.","dependencies":[{"issue_id":"homemaker-py-erc.6","depends_on_id":"homemaker-py-erc","type":"parent-child","created_at":"2026-06-23T00:16:23Z","created_by":"Bruno Postle","metadata":"{}"},{"issue_id":"homemaker-py-erc.6","depends_on_id":"homemaker-py-erc.2","type":"blocks","created_at":"2026-06-23T00:16:47Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":1,"dependent_count":0,"comment_count":0}
 {"id":"homemaker-py-erc.5","title":"Experiment: compactness-aware cuts (minimize leaf perimeter/area)","description":"Attacks the #1 factor, crinkliness (346) — a per-leaf perimeter/area property DISTINCT from proportion (aspect ratio). Proportion-aware seeding (leu.2) sizes splits but does not bias toward balanced, square-ish subdivision. Add a KD-tree-style 'keep both children compact' cut rule (prefer the cut orientation/position that minimises summed child perimeter/area) in construction.\n\nCONDITIONAL on Diagnostic A: if A shows per-leaf shape-fail is FLAT across densities (floor intrinsic to slicing density), better cuts at the same leaf count will not pay → this should be closed wont-fix in favour of leaf-sharing. Only build if A shows shape-fail RISES with density. A/B vs §12.2 baseline, seeds 0/1/2, 20000 evals, staged, default-OFF. Record DESIGN.md §13.5.","notes":"DEPRIORITISED by erc.1 verdict (§13.1): per-leaf shape-fail flat vs slicing density and cuts already squarest (_size_divisions_from_targets picks squarest rotation) yet still ~1.8 fails/leaf =\u003e little compactness headroom at fixed leaf count. Floor is intrinsic to leaf COUNT, not cut quality. Revisit only if leaf-sharing (erc.3) underdelivers.","status":"closed","priority":4,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-22T23:16:21Z","created_by":"Bruno Postle","updated_at":"2026-06-28T13:22:17Z","closed_at":"2026-06-28T13:22:17Z","close_reason":"wont-fix (DESIGN §13.7): Diag A (§13.1) showed the floor is intrinsic to leaf COUNT not cut quality; revisit condition was 'only if leaf-sharing underdelivers' but leaf-sharing OVER-delivered (−32…−39%, §13.3). Condition unmet.","dependencies":[{"issue_id":"homemaker-py-erc.5","depends_on_id":"homemaker-py-erc","type":"parent-child","created_at":"2026-06-23T00:16:21Z","created_by":"Bruno Postle","metadata":"{}"},{"issue_id":"homemaker-py-erc.5","depends_on_id":"homemaker-py-erc.1","type":"blocks","created_at":"2026-06-23T00:16:43Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":1,"dependent_count":0,"comment_count":0}
 {"id":"homemaker-py-2g5","title":"Rebuild occlusion/daylight/sun subsystem in Python (post-Phase-5, after optimisation fully native)","description":"DESIGN.md §6 port scope — a whole subsystem, not a term. quality_daylight (Leaf.pm:281-296) needs Urb::Misc::Sun + Urb::Field::Occlusion (+CIESky); quality_uncrinkliness also takes the occlusion object. Indoor spaces return 1 for daylight; cost is outdoor spaces + crinkliness. Port Sun_horizontal (262980-minute normalisation) and the occlusion wall set from Dom-\u003eWalls.","acceptance_criteria":"Daylight and crinkliness factors match Perl (float tolerance) across the corpus, including multi-storey cases","notes":"Re-scoped 2026-06-12: occlusion disabled in the Urb oracle instead of ported (see homemaker-py-gp2). Native fitness ships with simple crinkliness (illumination factor = 1, in homemaker-py-gnw). This issue is now the eventual Python occlusion rebuild, only after optimisation works entirely in Python. Restores outdoor-daylight and shaded-wall selection pressure.\nReframed 2026-06-17: orthogonal to epic homemaker-py-c4c. This is fitness FIDELITY (restoring daylight + shaded-wall selection pressure to match Perl), not search CAPABILITY — it changes what 'good' means, not the search's ability to find good. It will NOT improve final designs in the sense currently sought. Stays P4, deferred until the topology-search-quality epic lands and optimisation is fully native.","status":"open","priority":4,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-11T23:38:25Z","created_by":"Bruno Postle","updated_at":"2026-06-17T19:14:48Z","dependency_count":0,"dependent_count":0,"comment_count":0}
-{"_type":"memory","key":"correction-to-urb-fitness-bug-memory-bruno-2026","value":"CORRECTION to urb-fitness-bug memory (Bruno, 2026-06-12): 'C' is NOT a 'covered' type — Is_Covered is a geometric predicate (indoor space above). Urb's generic types are canonically UPPERCASE: C=circulation, O=outside, S=sahn (get_space_types qw/C O S/; corpus is 100% uppercase, never 'c'/'o' leaves). The mixed-case designs that fired the latent ratio_type first-match bug were created by homemaker's own operator type pool emitting lowercase 'c'/'o' — fixed: driver/operators now emit uppercase generics only, and class checks use t[0].lower() in 'cos'. The Urb class-sum patch stays as defensive hardening (zero impact on canonical designs). Native port (3y7/gnw): treat type classes case-insensitively, generics canonically uppercase."}
-{"_type":"memory","key":"experiment-harness-gotcha-the-leaf-sharing-relaxed-objective","value":"Experiment harness gotcha: the leaf-sharing RELAXED objective (§13.3) is injected ONLY by monkeypatching fitness.load_config in the parent process (run_staged_search.py / probe scripts). This is parent-process-only and does NOT propagate into ProcessPoolExecutor workers (n_workers\u003e1), which re-import fitness fresh and score under the STRICT on-disk patterns.config -\u003e r.n_fails MISMATCH (worker strict vs parent relaxed re-score). ALL §13.x floor runs were therefore SERIAL. Any future PARALLEL leaf-sharing experiment will silently mis-score until leaf_sharing lives on disk/CLI (tracked: homemaker-py-x3b). The parallel driver itself is correct; both paths score via load_config(programme_dir)."}
-{"_type":"memory","key":"island-model-psk-14-is-a-null-priming","value":"Island model (psk, §14) is a NULL: priming a population from N converged independent elites + crossover-heavy migration does not beat best-of-N at equal total budget (maple island 124 vs control 116). The child_probe instrument shows WHY: area-matched crossover across independently-converged elites almost never synthesizes (1-3 of ~64 children beat the better parent, max drop 2-5) because the slicing encoding is non-canonical (9gp), so splices are disruptive not combinatorial. Search-machinery null #3 after graded-objective and niching/restarts; residual stays geometry/shape-bound."}
-{"_type":"memory","key":"never-use-corpus-filenames-candidate-001-dom-candidate","value":"Never use corpus filenames (candidate-001.dom, candidate-002.dom, generated.dom, init.dom, etc.) as --output targets when running experiments. These are test fixtures. Always write experimental outputs to scratch/ or a timestamped path. Lesson from 2026-06-14: warm-start runs overwrote candidate-001/002.dom and broke graph tests."}
-{"_type":"memory","key":"ld2-13-6-interior-o-seed-diagnostic-all","value":"ld2/§13.6 interior-O seed diagnostic: ALL crinkliness fails in the constructed bal+share seed are UNDER-exposed (crink\u003c0.62, landlocked rooms with no facade + no uncovered-O neighbour) — zero over-exposed sliver fails. So the erc crinkliness residual is genuine under-daylighting, validating the interior light-well premise. Default outside_divisor=6 was too sparse (null: harbor 147-\u003e142, crinkliness even rose). odiv=3 is the seed-optimal joint setting: harbor seed fails 147-\u003e129 (-18), maple 219-\u003e206 (-14), landlocked fails drop, at cost of more leaves (harbor +4, maple +8). Because it ADDS leaves it carries the §13.4 wash-out risk; A/B to convergence pending."}
-{"_type":"memory","key":"programme-house-optimisation-result-2026-06-14-15","value":"Programme-house optimisation result (2026-06-14/15): best achievable is 1 fail (l1 wrong level, score ~0.005). 0 fails is geometrically impossible: l1 (min 27m²) must occupy ll (~23m²) at level 0, which eliminates the t3-adj-C provider; dividing ll into lll(l1)+llr(C) gives llr proportion ~6:1 (fails). Python memetic optimizer achieves 1 fail in 50k evals vs Perl optimiser's 2-3 fails. Winning topology: TWO C nodes at level 0 — ll(C) for t3-adj-C via geometric contact, rl(C) for staircase via tree-sibling adjacency to rrr(O). Best .dom: scratch/from-warmstart-fixed.dom and scratch/from-compound3-fixed.dom."}
-{"_type":"memory","key":"proportion-aware-constructive-seeding-leu-2-12-2","value":"Proportion-aware constructive seeding (leu.2/§12.2): sizing seed cuts from target AREAS only regresses (thin slivers wreck aspect); you must ALSO pick each cut's rotation for child squareness. It is a convergence ACCELERATOR via a deeper local optimum around the constructed topology: wins where that topology is roughly right and budget is scarce (harbor -13%, maple -10% at 20k evals) but DELAYS small programmes where the seed must be restructured by undivide (programme-house regresses at fixed budget, yet reaches the floor given budget - speed, not asymptote). Default-on. Also: n_storeys must honour storey_minimum, not just level: keys (programme-house storey_minimum:2, all rooms level:0 - was seeded 1 storey short; cq1)."}
-{"_type":"memory","key":"run-to-run-reproducibility-in-homemaker-layout-serial","value":"Run-to-run reproducibility in homemaker-layout: serial search (workers=1) is byte-for-byte deterministic; parallel (workers\u003e1) is now deterministic too AFTER fixing driver._run_batch to admit futures in submission order (was as_completed/completion order, bug xcy). Reproducibility holds only for a FIXED worker count — serial vs parallel differ because children-per-iteration is 1 vs n_workers (different batch granularity), which is expected, not a bug. The constructive seeder was NEVER nondeterministic: _assign_adjacency_aware has unique idx tiebreaks; comparing topologies with Python builtin hash() of the signature STRING is invalid (PYTHONHASHSEED salts str hashing per process) — use a stable hash (sha1) or genome.signature equality."}
 {"_type":"memory","key":"strategy-decision-2026-06-12-bruno-occlusion-daylight","value":"Strategy decision 2026-06-12 (Bruno): occlusion/daylight is ORTHOGONAL to building a scalable optimiser. Disable it in Urb (env flag, homemaker-py-gp2) rather than port it; native fitness uses simple crinkliness (illumination factor = 1); rebuild occlusion in Python only after optimisation is fully native (homemaker-py-2g5, now P4). Consequence: all scores change when the flag flips — re-baseline corpus/.score, DESIGN \\$4.5 gains, gate bars at one clean boundary AFTER homemaker-py-1p0 closes; Phase-2 urb-evolve benchmark must run with the same flag."}
-{"_type":"memory","key":"urb-oracle-nondeterminism-urb-fitness-pl-output-varies","value":"Urb oracle nondeterminism: urb-fitness.pl output varies run-to-run from Perl hash-order randomisation — .fails line ORDER shuffles (compare sorted, use oracle.Score.fail_lines) and the score float can flip by ~1 ULP (compare with math.isclose rel_tol=1e-12, never ==). Not a batching artifact; affects single runs too. Matters for the Phase 3 native-fitness parity gate (homemaker-py-uxz)."}
-{"_type":"memory","key":"user-preference-bruno-this-is-a-fedora-system","value":"User preference (Bruno): this is a Fedora system — NEVER install Python packages via pip without asking first; always ask whether to install the rpm via dnf (e.g. python3-cma) before considering pip. Applies to any dependency additions."}
-{"_type":"memory","key":"warm-x0-initialization-bug-pattern-when-a-topology","value":"warm_x0 initialization bug pattern: when a topology operator explicitly sets division ratios on a newly-created node (e.g. compound_fix sets node.division=[0.25,0.25] for t3), parent.ratios has no entry for that node (it was a leaf). warm_x0 defaults it to 0.5, corrupting the inner loop's starting point and making the operator invisible to lex comparison. Fix: only propagate child ratios for nodes where the parent node was NOT already divided; stale hidden nodes revealed by structural mutations (swap flipping b.below) must NOT contribute their pre-writeback values. See driver.py lines 259-267 (fixed 2026-06-14)."}
 {"_type":"memory","key":"adjacency-in-binary-slicing-tree-is-structural-not","value":"Adjacency in binary slicing tree is structural, not geometric: the inner-loop NM cannot fix topological adjacency failures. Two paths exist: (1) tree-sibling adjacency — a node is adjacent to its sibling in the tree; (2) cross-zone geometric adjacency — leaves from different subtrees that happen to share a boundary. Staircase/adjacency fails require a topology mutation that changes which nodes are siblings or which zones touch. This was proved empirically on programme-house: staircase fail from rot=0 layout could not be fixed by NM but was fixed by level_retype creating a two-C topology (2026-06-14/15)."}
-{"_type":"memory","key":"deceptive-valleys-in-topology-search-when-every-single","value":"Deceptive valleys in topology search: when every single-step mutation from a target state passes through a high-fail intermediary (e.g. level_fix displaces a room into 5+ new fails), a compound operator that atomically applies two coordinated changes can escape. Design compound operators to land on the low-fail state directly, bypassing the deceptive gradient. Programme-house example: level_compound_fix atomically moves the level-constrained room AND re-inserts the displaced room adjacent to C in one step (operators.py, 2026-06-14)."}
+{"_type":"memory","key":"experiment-harness-gotcha-the-leaf-sharing-relaxed-objective","value":"Experiment harness gotcha: the leaf-sharing RELAXED objective (§13.3) is injected ONLY by monkeypatching fitness.load_config in the parent process (run_staged_search.py / probe scripts). This is parent-process-only and does NOT propagate into ProcessPoolExecutor workers (n_workers\u003e1), which re-import fitness fresh and score under the STRICT on-disk patterns.config -\u003e r.n_fails MISMATCH (worker strict vs parent relaxed re-score). ALL §13.x floor runs were therefore SERIAL. Any future PARALLEL leaf-sharing experiment will silently mis-score until leaf_sharing lives on disk/CLI (tracked: homemaker-py-x3b). The parallel driver itself is correct; both paths score via load_config(programme_dir)."}
 {"_type":"memory","key":"homemaker-py-pythonpath-set-pythonpath-home-bruno-src","value":"homemaker-layout PYTHONPATH: package installed as 'homemaker-layout' via pip install -e . so 'import homemaker_layout' works from anywhere without PYTHONPATH. For running tests use 'python -m pytest' from project root /home/bruno/src/homemaker-layout (pyproject.toml adds src/ automatically). Never try pip show homemaker — that's the old homemaker-addon conflict."}
 {"_type":"memory","key":"multi-storey-staircase-consistency-when-dividing-or-retyping","value":"Multi-storey staircase consistency: when dividing or retyping a circulation (C) leaf at one level, the same structural change should be propagated to the matching leaf on ALL other storeys so the stair core path is maintained. The optimizer cannot fix staircase disruptions through trial-and-error geometry alone — it requires a synchronized multi-level operator that applies the same topology change to every storey simultaneously."}
-{"_type":"memory","key":"urb-fitness-bug-found-fixed-2026-06-12","value":"Urb fitness bug found+fixed 2026-06-12 (patch in /home/bruno/src/urb, uncommitted): ProgrammeDriven.pm ratio_o/ratio_type grepped case-insensitively over the ratios hash and took the FIRST key — nondeterministic (x4.5 score swings) for designs with mixed-case type classes (both 'c' circulation and 'C' covered). Fixed to SUM the class (matches Is_Circulation//Is_Outside semantics); 35/35 corpus scores unchanged. CRITICAL for homemaker-py-3y7/gnw: the native port must implement class-SUM ratios. Building.pm has the same unpatched pattern (site-driven path, not used by our oracle). Also: the memetic search reward-hacked this bug before the fix — search results predating it are noise artifacts."}
+{"_type":"memory","key":"user-preference-bruno-this-is-a-fedora-system","value":"User preference (Bruno): this is a Fedora system — NEVER install Python packages via pip without asking first; always ask whether to install the rpm via dnf (e.g. python3-cma) before considering pip. Applies to any dependency additions."}
 {"_type":"memory","key":"cli-tool-style-prefer-python-m-homemaker-module","value":"CLI tool style: prefer python -m homemaker.module --parameters pattern, installable via pip install -e . with pyproject.toml entry_points. Not standalone bin/ scripts."}
+{"_type":"memory","key":"island-model-psk-14-is-a-null-priming","value":"Island model (psk, §14) is a NULL: priming a population from N converged independent elites + crossover-heavy migration does not beat best-of-N at equal total budget (maple island 124 vs control 116). The child_probe instrument shows WHY: area-matched crossover across independently-converged elites almost never synthesizes (1-3 of ~64 children beat the better parent, max drop 2-5) because the slicing encoding is non-canonical (9gp), so splices are disruptive not combinatorial. Search-machinery null #3 after graded-objective and niching/restarts; residual stays geometry/shape-bound."}
+{"_type":"memory","key":"never-use-corpus-filenames-candidate-001-dom-candidate","value":"Never use corpus filenames (candidate-001.dom, candidate-002.dom, generated.dom, init.dom, etc.) as --output targets when running experiments. These are test fixtures. Always write experimental outputs to scratch/ or a timestamped path. Lesson from 2026-06-14: warm-start runs overwrote candidate-001/002.dom and broke graph tests."}
+{"_type":"memory","key":"urb-oracle-nondeterminism-urb-fitness-pl-output-varies","value":"Urb oracle nondeterminism: urb-fitness.pl output varies run-to-run from Perl hash-order randomisation — .fails line ORDER shuffles (compare sorted, use oracle.Score.fail_lines) and the score float can flip by ~1 ULP (compare with math.isclose rel_tol=1e-12, never ==). Not a batching artifact; affects single runs too. Matters for the Phase 3 native-fitness parity gate (homemaker-py-uxz)."}
+{"_type":"memory","key":"warm-x0-initialization-bug-pattern-when-a-topology","value":"warm_x0 initialization bug pattern: when a topology operator explicitly sets division ratios on a newly-created node (e.g. compound_fix sets node.division=[0.25,0.25] for t3), parent.ratios has no entry for that node (it was a leaf). warm_x0 defaults it to 0.5, corrupting the inner loop's starting point and making the operator invisible to lex comparison. Fix: only propagate child ratios for nodes where the parent node was NOT already divided; stale hidden nodes revealed by structural mutations (swap flipping b.below) must NOT contribute their pre-writeback values. See driver.py lines 259-267 (fixed 2026-06-14)."}
+{"_type":"memory","key":"ld2-13-6-interior-o-seed-diagnostic-all","value":"ld2/§13.6 interior-O seed diagnostic: ALL crinkliness fails in the constructed bal+share seed are UNDER-exposed (crink\u003c0.62, landlocked rooms with no facade + no uncovered-O neighbour) — zero over-exposed sliver fails. So the erc crinkliness residual is genuine under-daylighting, validating the interior light-well premise. Default outside_divisor=6 was too sparse (null: harbor 147-\u003e142, crinkliness even rose). odiv=3 is the seed-optimal joint setting: harbor seed fails 147-\u003e129 (-18), maple 219-\u003e206 (-14), landlocked fails drop, at cost of more leaves (harbor +4, maple +8). Because it ADDS leaves it carries the §13.4 wash-out risk; A/B to convergence pending."}
+{"_type":"memory","key":"proportion-aware-constructive-seeding-leu-2-12-2","value":"Proportion-aware constructive seeding (leu.2/§12.2): sizing seed cuts from target AREAS only regresses (thin slivers wreck aspect); you must ALSO pick each cut's rotation for child squareness. It is a convergence ACCELERATOR via a deeper local optimum around the constructed topology: wins where that topology is roughly right and budget is scarce (harbor -13%, maple -10% at 20k evals) but DELAYS small programmes where the seed must be restructured by undivide (programme-house regresses at fixed budget, yet reaches the floor given budget - speed, not asymptote). Default-on. Also: n_storeys must honour storey_minimum, not just level: keys (programme-house storey_minimum:2, all rooms level:0 - was seeded 1 storey short; cq1)."}
+{"_type":"memory","key":"run-to-run-reproducibility-in-homemaker-layout-serial","value":"Run-to-run reproducibility in homemaker-layout: serial search (workers=1) is byte-for-byte deterministic; parallel (workers\u003e1) is now deterministic too AFTER fixing driver._run_batch to admit futures in submission order (was as_completed/completion order, bug xcy). Reproducibility holds only for a FIXED worker count — serial vs parallel differ because children-per-iteration is 1 vs n_workers (different batch granularity), which is expected, not a bug. The constructive seeder was NEVER nondeterministic: _assign_adjacency_aware has unique idx tiebreaks; comparing topologies with Python builtin hash() of the signature STRING is invalid (PYTHONHASHSEED salts str hashing per process) — use a stable hash (sha1) or genome.signature equality."}
+{"_type":"memory","key":"correction-to-urb-fitness-bug-memory-bruno-2026","value":"CORRECTION to urb-fitness-bug memory (Bruno, 2026-06-12): 'C' is NOT a 'covered' type — Is_Covered is a geometric predicate (indoor space above). Urb's generic types are canonically UPPERCASE: C=circulation, O=outside, S=sahn (get_space_types qw/C O S/; corpus is 100% uppercase, never 'c'/'o' leaves). The mixed-case designs that fired the latent ratio_type first-match bug were created by homemaker's own operator type pool emitting lowercase 'c'/'o' — fixed: driver/operators now emit uppercase generics only, and class checks use t[0].lower() in 'cos'. The Urb class-sum patch stays as defensive hardening (zero impact on canonical designs). Native port (3y7/gnw): treat type classes case-insensitively, generics canonically uppercase."}
+{"_type":"memory","key":"deceptive-valleys-in-topology-search-when-every-single","value":"Deceptive valleys in topology search: when every single-step mutation from a target state passes through a high-fail intermediary (e.g. level_fix displaces a room into 5+ new fails), a compound operator that atomically applies two coordinated changes can escape. Design compound operators to land on the low-fail state directly, bypassing the deceptive gradient. Programme-house example: level_compound_fix atomically moves the level-constrained room AND re-inserts the displaced room adjacent to C in one step (operators.py, 2026-06-14)."}
+{"_type":"memory","key":"experiment-seeding-pitfall-run-search-scaled-py-s","value":"Experiment seeding pitfall: run_search_scaled.py's default PH_SEED (c964…dom) is a FINISHED programme-house design — passing it warm-starts and floors at ~3 fails, NOT a blank-slate topology search. For blank-slate runs comparable to §11.5/§11.6 baselines, seed from examples/programme-house/init.dom (a bare undivided plot; driver bootstrap auto-triggers only on bare plots). Bit the 6zy sweep — first pass used c964 and falsely showed 3-fail floor across the whole grid."}
+{"_type":"memory","key":"urb-fitness-bug-found-fixed-2026-06-12","value":"Urb fitness bug found+fixed 2026-06-12 (patch in /home/bruno/src/urb, uncommitted): ProgrammeDriven.pm ratio_o/ratio_type grepped case-insensitively over the ratios hash and took the FIRST key — nondeterministic (x4.5 score swings) for designs with mixed-case type classes (both 'c' circulation and 'C' covered). Fixed to SUM the class (matches Is_Circulation//Is_Outside semantics); 35/35 corpus scores unchanged. CRITICAL for homemaker-py-3y7/gnw: the native port must implement class-SUM ratios. Building.pm has the same unpatched pattern (site-driven path, not used by our oracle). Also: the memetic search reward-hacked this bug before the fix — search results predating it are noise artifacts."}
+{"_type":"memory","key":"programme-house-optimisation-result-2026-06-14-15","value":"Programme-house optimisation result (2026-06-14/15): best achievable is 1 fail (l1 wrong level, score ~0.005). 0 fails is geometrically impossible: l1 (min 27m²) must occupy ll (~23m²) at level 0, which eliminates the t3-adj-C provider; dividing ll into lll(l1)+llr(C) gives llr proportion ~6:1 (fails). Python memetic optimizer achieves 1 fail in 50k evals vs Perl optimiser's 2-3 fails. Winning topology: TWO C nodes at level 0 — ll(C) for t3-adj-C via geometric contact, rl(C) for staircase via tree-sibling adjacency to rrr(O). Best .dom: scratch/from-warmstart-fixed.dom and scratch/from-compound3-fixed.dom."}