From 83b628404576f71b78db14e27bb085cb0a3e31f7 Mon Sep 17 00:00:00 2001 From: Bruno Postle Date: Sat, 27 Jun 2026 21:15:50 +0100 Subject: [PATCH] pll: flip bal+share (factor 3) defaults ON in driver.search/search_staged MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit erc.7/§13.5 verdict: depth_balanced + leaf_sharing (factor 3) is the winning Phase-8 stack. Flip the three knobs to default-on so homemaker-evolve inherits them; env-var A/B overrides (DEPTHBAL/ LEAFSHARE/LEAFSHAREFAC) unchanged. 214 tests pass, no snapshot churn. Co-Authored-By: Claude Opus 4.8 --- .beads/issues.jsonl | 22 +++++++++++----------- src/homemaker_layout/driver.py | 12 ++++++------ 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/.beads/issues.jsonl b/.beads/issues.jsonl index 1606301..563d0ff 100644 --- a/.beads/issues.jsonl +++ b/.beads/issues.jsonl @@ -22,7 +22,7 @@ {"id":"homemaker-py-1p0","title":"Geometry inner loop: full-objective equal-offset ratio optimiser","description":"DESIGN.md §5.1, §7 Phase 1. Productionise experiments/optimize_fullfitness.py into homemaker: optimise(topology, x0=None) -\u003e (geometry, fitness). DOF = equal-offset division ratios of free branches (solver.free_branches, lowest-storey cut ownership), clipped to [eps, 1-eps]. Objective = full oracle fitness (never a proxy — §4.2 falsified). Must support warm-start x0 (§5.6) and a population/batch evaluation mode so each iteration scores via one batched oracle call (§4.6).","acceptance_criteria":"Reproduces or exceeds §4.5 gains (x1.24–x1.67, no new failures) on 2f45907, candidate-002, c964435; works as a library call on any corpus .dom","status":"closed","priority":1,"issue_type":"feature","assignee":"Bruno Postle","owner":"bruno@postle.net","created_at":"2026-06-11T23:36:58Z","created_by":"Bruno Postle","updated_at":"2026-06-12T08:46:31Z","started_at":"2026-06-12T00:14:19Z","closed_at":"2026-06-12T08:46:31Z","close_reason":"innerloop.optimise() lands: batched CMA-ES sigma ladder (0.05/0.15, IPOP popsize doubling, deterministic seeding) over equal-offset free-branch ratios vs full oracle fitness; warm-start x0 supported. Acceptance vs unprojected originals: x1.65/x1.66/x1.58 against bars x1.24/x1.67/x1.59, no new failures, 46 oracle calls vs NM's 200. Two near-bar results accepted as reproduced-within-noise (1% tol) — draw spread brackets the single-NM-draw bars; approved by Bruno 2026-06-12. Gotchas: equal-offset projection of legacy unequal cuts loses fitness/adds failures (midpoint projection used); pycma seed=0 means clock-seeded.","dependencies":[{"issue_id":"homemaker-py-1p0","depends_on_id":"homemaker-py-av5","type":"blocks","created_at":"2026-06-12T00:39:33Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":1,"dependent_count":3,"comment_count":0} {"id":"homemaker-py-8cs","title":"Experiment: warm-vs-cold start of inner loop (Lamarckian inheritance)","description":"DESIGN.md §5.6, §4.6. Warm-starting a child topology's inner loop from the parent's optimised ratios is the main lever for cutting per-topology cost (~3 min/topology cold). Apply single topology mutations to optimised corpus designs, re-optimise warm (surviving cuts keep values, new cuts get heuristic defaults) vs cold, compare oracle-call counts to convergence at equal final fitness.","acceptance_criteria":"Speedup factor measured across \u003e=10 mutated topologies; decision recorded (expect order-of-magnitude; if \u003c2x, revisit §4.6 Phase-2 scoping)","notes":"Experiment script committed (experiments/warm_vs_cold.py, 1cc86c8) and machinery validated oracle-free; one mutated child scored through the oracle OK. Waiting on homemaker-py-gp2 reference run to finish, then execute under URB_NO_OCCLUSION=1 (3 parents x 400 evals + 12 children x 2 x 200 evals, ~1.5-2 h oracle time). Default budgets: parent 400, child 200; target = evals to 95% of best final.","status":"closed","priority":1,"issue_type":"task","owner":"bruno@postle.net","created_at":"2026-06-11T23:36:58Z","created_by":"Bruno Postle","updated_at":"2026-06-12T11:44:45Z","closed_at":"2026-06-12T11:44:45Z","close_reason":"Measured (URB_NO_OCCLUSION=1, parent budget 400, child 200, 12 single mutations across 3 designs): cold start reached 95% of warm final in 0/12 cases within budget — speedup unbounded at practical budgets; warm finals beat cold finals x1.2-x4 in 12/12; 6/12 warm starts were within 95% at 1 eval (near-neutral mutations). Decision: Lamarckian warm-starting is MANDATORY in the memetic driver (homemaker-py-b39), not an optimisation; cold starts produce strictly worse geometry at equal budget. Note: 2 undivides were exactly fitness-neutral (same-type merge == Merge_Divided equivalence) — locality datum for homemaker-py-nyb.","dependencies":[{"issue_id":"homemaker-py-8cs","depends_on_id":"homemaker-py-1p0","type":"blocks","created_at":"2026-06-12T00:39:34Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":1,"dependent_count":0,"comment_count":0} {"id":"homemaker-py-av5","title":"Batched oracle: score many .dom files per invocation","description":"oracle.py currently scores one .dom per urb-fitness.pl call (~1.65 s/dom). DESIGN.md §4.6: batching amortises Perl startup to ~0.99 s/dom and is required so population/batch optimisers can score a whole generation in one oracle call. Extend oracle.py with a batch API: write N .dom files, one perl invocation, parse N .score/.fails pairs. Keep the single-file path for compatibility.","acceptance_criteria":"Batch of 35 corpus files scores in one perl invocation; per-file results identical to single-file calls; measured s/dom reported","status":"closed","priority":1,"issue_type":"task","assignee":"Bruno Postle","owner":"bruno@postle.net","created_at":"2026-06-11T23:36:56Z","created_by":"Bruno Postle","updated_at":"2026-06-12T00:14:06Z","started_at":"2026-06-11T23:50:40Z","closed_at":"2026-06-12T00:14:06Z","close_reason":"score_batch() lands in oracle.py; 35-file corpus parity verified single-vs-batch (1e-12 rel fitness, exact fail sets); 0.98 s/dom batched vs 1.27 single, x1.30","dependency_count":0,"dependent_count":1,"comment_count":0} -{"id":"homemaker-py-pll","title":"Flip depth_balanced + leaf_sharing (factor 3) defaults to ON","description":"erc.7/§13.5 verdict: depth_balanced + leaf_sharing (factor 3) is the winning Phase-8 stack (harbor -21%, maple -4.6% vs share-alone; factor 3 confirmed optimal). Both default OFF today. Make the bal+share stack the default in driver.search/search_staged (leaf_sharing=True, leaf_share_factor=3, depth_balanced=True) and update the affected tests (the §13.4 note records 214 tests pass with depth_balanced OFF — expect ordering/snapshot churn). Keep env-var overrides (DEPTHBAL/LEAFSHARE/LEAFSHAREFAC) for A/B. leaf_share_max stays 4 (covers factor\u003c=4, no missing-fail leak).","status":"open","priority":2,"issue_type":"task","owner":"bruno@postle.net","created_at":"2026-06-27T16:12:53Z","created_by":"Bruno Postle","updated_at":"2026-06-27T16:12:53Z","dependency_count":0,"dependent_count":0,"comment_count":0} +{"id":"homemaker-py-pll","title":"Flip depth_balanced + leaf_sharing (factor 3) defaults to ON","description":"erc.7/§13.5 verdict: depth_balanced + leaf_sharing (factor 3) is the winning Phase-8 stack (harbor -21%, maple -4.6% vs share-alone; factor 3 confirmed optimal). Both default OFF today. Make the bal+share stack the default in driver.search/search_staged (leaf_sharing=True, leaf_share_factor=3, depth_balanced=True) and update the affected tests (the §13.4 note records 214 tests pass with depth_balanced OFF — expect ordering/snapshot churn). Keep env-var overrides (DEPTHBAL/LEAFSHARE/LEAFSHAREFAC) for A/B. leaf_share_max stays 4 (covers factor\u003c=4, no missing-fail leak).","status":"closed","priority":2,"issue_type":"task","assignee":"Bruno Postle","owner":"bruno@postle.net","created_at":"2026-06-27T16:12:53Z","created_by":"Bruno Postle","updated_at":"2026-06-27T20:15:26Z","started_at":"2026-06-27T16:14:52Z","closed_at":"2026-06-27T20:15:26Z","close_reason":"Closed","dependencies":[{"issue_id":"homemaker-py-pll","depends_on_id":"homemaker-py-erc","type":"parent-child","created_at":"2026-06-27T17:13:34Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":0,"dependent_count":0,"comment_count":0} {"id":"homemaker-py-9o5","title":"Multi-use leaves: one leaf satisfies several COMPATIBLE different codes (type superposition)","description":"A leaf that legitimately and simultaneously satisfies several DIFFERENT compatible programme requirements (e.g. study + guest bedroom, or kitchen + dining). Distinct from erc.3 leaf-sharing, which aggregates k instances of the SAME code; this is a strict generalisation across DIFFERENT codes. Idea from Bruno (this corresponds to Stewart Brand's 'How Buildings Learn' — loose-fit / long-life rooms whose use churns over a building's lifetime).\n\nWHY IT MATTERS\n1. Architectural deliverable: adaptable multi-use rooms (Brand loose-fit), not just an optimisation trick.\n2. Generalises the erc.3 floor-lowering lever to the SINGLETON (count:1) long tail that same-type sharing cannot reach: one leaf covering one X AND one Y removes a room-leaf, paying the ~1.8/leaf crinkliness tax (§13.1) once instead of twice. Crinkliness is scale-invariant, so a larger multi-use leaf is not penalised for size.\n\nTWO READINGS\n(a) Superposition as a SEARCH RELAXATION: carry a distribution/set of candidate types per leaf, evaluate a relaxed (expected/best-case) fitness for a smoother landscape, then COLLAPSE (argmax) at the end. Risks: relaxation gap (relaxed optimum need not sit near a good integer solution); collapse is itself a constrained rounding/assignment problem (cannot collapse 5 superposed leaves all to 'kitchen' when 1 is required); and search-machinery bets are 0/3 historically (§11-12) vs construction 4/4 — the floor is geometric, so pure search-easing may fight the wrong battle. LOWER PRIORITY framing.\n(b) Multi-use as the DESIGN GOAL (preferred): the leaf permanently serves a SET of compatible codes; no collapse needed, multi-use survives into the output. Mirrors erc.3's mechanism exactly but with a SET of codes instead of an integer count: stamp leaf with the codes it serves (type-guarded as in erc.3 leaf.share/share_type); fitness count credits each code in the set, size scored against the union/least-upper-bound of targets, width/proportion as today (scale-invariant), adjacency satisfied if the SET satisfies it.\n\nIMPLEMENTATION SKETCH (path b)\n- dom.Node: a set/list of served codes (generalises leaf.share/share_type from erc.3). Survives search via deepcopy; emit in .dom only when non-trivial (as with 'share').\n- graph.check_space_counts: a multi-use leaf credits coverage to EACH code in its set (type-guarded: honoured only while its served set is consistent with its assignment).\n- fitness size/width/proportion: score the multi-use leaf against the combined target (union/LUB) of its served codes; crinkliness/access unchanged.\n- construction: a new constructive option that fuses COMPATIBLE singleton rooms into shared multi-use leaves (analogous to operators._share_rooms but across codes), honouring adjacency/level.\n- default OFF; controls reproduce §12.2 baseline.\n\nKEY OPEN QUESTIONS (Bruno to spec)\n- Who declares type-COMPATIBILITY? A new architectural input, analogous to adjacency (e.g. a 'compatible:' / 'multiuse:' list per space in patterns.config). kitchen+bathroom is nonsensical; study+guestroom is fine.\n- Does the final design COLLAPSE to single uses or stay loose-fit (keep superposition as a deliverable)? Brand argues for keeping it.\n- How exactly to combine size/width/proportion targets for a leaf serving 2+ codes (max? union? a 'dominant use' target?).\n- Interaction with erc.3 same-type sharing and x3b per-code control — composable? (a leaf could be 'k of X' AND 'one Y').\n\nRELATES TO: erc.3 (same-type leaf-sharing, the special case), x3b (per-code shareable flag), erc.7 (factor/synergy sweep), erc epic (lower the geometry floor). Concept only — implement in a future session.","status":"open","priority":2,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-24T21:11:03Z","created_by":"Bruno Postle","updated_at":"2026-06-24T21:11:03Z","dependencies":[{"issue_id":"homemaker-py-9o5","depends_on_id":"homemaker-py-erc.3","type":"related","created_at":"2026-06-24T22:11:48Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":0,"dependent_count":0,"comment_count":0} {"id":"homemaker-py-x3b","title":"Per-code shareable flag (SpaceReq.share) + homemaker-evolve CLI wiring","description":"Make leaf-sharing (erc.3, §13.3) safe to default-on by giving the programme author per-code control, and expose it on the real CLI (not just the experiment env var).\n\nDesign (agreed with Bruno, open to refinement — he has follow-up questions):\n- patterns.config per-space optional key 'share: N' -\u003e SpaceReq.share (int, default 1 = not shareable). N\u003e=2 means up to N rooms of this code per shared leaf.\n- Master enable stays the 'leaf_sharing' conf/CLI flag (default OFF -\u003e baseline, controls reproduce).\n- Global grain selector 'leaf_share_factor': 0 =\u003e per-code opt-in only (share a code iff it has share:N\u003e=2); F\u003e=2 =\u003e global mode (share all sized multi-instance codes at grain F) with per-code 'share' overriding (share:1 opts a code OUT). This single knob covers both the safe default-on philosophy (0 + per-code keys) and the §13.3 experiment (F=3, reproducible, no example-programme edits).\n- operators._share_rooms picks grain per code accordingly; fitness honours the explicit leaf.share (type-guarded) as today.\n- homemaker-evolve gains --leaf-sharing / --leaf-share-factor, threaded to driver.search/search_staged (already plumbed).\n- Tests: per-code grain, opt-out, default-OFF parity. NOT editing example programmes so §13.3 stays reproducible.\n\nRelates to dyh (productionise). erc.7 covers the factor/max_share sweep + erc.4 synergy.","status":"open","priority":2,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-24T21:03:05Z","created_by":"Bruno Postle","updated_at":"2026-06-24T21:14:56Z","started_at":"2026-06-24T21:03:45Z","dependency_count":0,"dependent_count":0,"comment_count":0} {"id":"homemaker-py-erc.7","title":"Leaf-sharing × erc.4 depth-balancing synergy + factor/max_share sweep","description":"With the missing-fail leak closed by explicit multiplicity (§13.3), revisit the erc.3↔erc.4 synergy the diagnostics predicted: depth-balanced construction lands shared leaves at their correct absolute k×target area, which should further cut size+crinkliness. Also sweep leaf_share_factor (3 won here; try 2/4) and leaf_share_max (default 4) on maple+harbor, seeds 0/1/2, staged 20k, vs the §13.3 factor-3 result (maple 86.3, harbor 50.3).","notes":"FACTOR SWEEP DONE (§13.5): factor 3 confirmed default under bal+share. maple f2=92.7 f3=82.3 f4=83.3; harbor f2=53.0 f3=40.0 f4=39.7. Factor 2 regresses both; f3/f4 tied within noise (f3 wins maple +1.0, f4 wins harbor +0.3). leaf_share_max=4 covers factor\u003c=4, no missing-fail leak (re-score OK all runs). erc.7 complete.","status":"closed","priority":2,"issue_type":"feature","assignee":"Bruno Postle","owner":"bruno@postle.net","created_at":"2026-06-24T20:51:43Z","created_by":"Bruno Postle","updated_at":"2026-06-27T09:55:56Z","started_at":"2026-06-26T07:39:54Z","closed_at":"2026-06-27T09:55:56Z","close_reason":"Closed","dependencies":[{"issue_id":"homemaker-py-erc.7","depends_on_id":"homemaker-py-erc","type":"parent-child","created_at":"2026-06-24T21:51:42Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":0,"dependent_count":0,"comment_count":0} @@ -66,18 +66,18 @@ {"id":"homemaker-py-erc.6","title":"Experiment: inner-loop slack-expansion objective term","description":"Inner-loop counterpart to plot-fill construction. If Diagnostic B shows the inner loop has room to expand leaves into slack but no objective gradient to do so (the scalar rewards hitting target area but not exceeding it where slack exists), add a term/incentive so the ratio optimiser pushes leaf boundaries out to consume neighbouring slack and satisfy size, rather than parking at target.\n\nCONDITIONAL on Diagnostic B: build this only if B localizes the gap to the inner loop (room to expand, no gradient); if B shows construction targets too-small dims, prefer the plot-fill construction sibling. Must preserve the §5.4 inner-loop cliff / §4.9 lexicographic protection — the term sits where it cannot displace the fail-count ordering. A/B vs §12.2 baseline, seeds 0/1/2, 20000 evals, staged, default-OFF. Record DESIGN.md §13.6.","notes":"DEPRIORITISED by Diagnostic B (§13.2). B shows the inner loop CANNOT repair undersize: the slack is depth-driven maldistribution baked into the frozen topology, and the equal-offset ratio DOF cannot shrink a 14x leaf to feed a starved one without trading into shape fails (0.5^n cliff). Wrong DOF and wrong direction — the blocker is slicing POSITION, not a missing expansion reward. Fix belongs upstream in construction/topology (erc.4 re-scoped, erc.3). Keep as a low-priority follow-up only if a depth-balanced construction still leaves a residual size gradient the inner loop could pick up.","status":"open","priority":4,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-22T23:16:24Z","created_by":"Bruno Postle","updated_at":"2026-06-23T21:47:05Z","dependencies":[{"issue_id":"homemaker-py-erc.6","depends_on_id":"homemaker-py-erc","type":"parent-child","created_at":"2026-06-23T00:16:23Z","created_by":"Bruno Postle","metadata":"{}"},{"issue_id":"homemaker-py-erc.6","depends_on_id":"homemaker-py-erc.2","type":"blocks","created_at":"2026-06-23T00:16:47Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":1,"dependent_count":0,"comment_count":0} {"id":"homemaker-py-erc.5","title":"Experiment: compactness-aware cuts (minimize leaf perimeter/area)","description":"Attacks the #1 factor, crinkliness (346) — a per-leaf perimeter/area property DISTINCT from proportion (aspect ratio). Proportion-aware seeding (leu.2) sizes splits but does not bias toward balanced, square-ish subdivision. Add a KD-tree-style 'keep both children compact' cut rule (prefer the cut orientation/position that minimises summed child perimeter/area) in construction.\n\nCONDITIONAL on Diagnostic A: if A shows per-leaf shape-fail is FLAT across densities (floor intrinsic to slicing density), better cuts at the same leaf count will not pay → this should be closed wont-fix in favour of leaf-sharing. Only build if A shows shape-fail RISES with density. A/B vs §12.2 baseline, seeds 0/1/2, 20000 evals, staged, default-OFF. Record DESIGN.md §13.5.","notes":"DEPRIORITISED by erc.1 verdict (§13.1): per-leaf shape-fail flat vs slicing density and cuts already squarest (_size_divisions_from_targets picks squarest rotation) yet still ~1.8 fails/leaf =\u003e little compactness headroom at fixed leaf count. Floor is intrinsic to leaf COUNT, not cut quality. Revisit only if leaf-sharing (erc.3) underdelivers.","status":"open","priority":4,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-22T23:16:21Z","created_by":"Bruno Postle","updated_at":"2026-06-23T21:00:46Z","dependencies":[{"issue_id":"homemaker-py-erc.5","depends_on_id":"homemaker-py-erc","type":"parent-child","created_at":"2026-06-23T00:16:21Z","created_by":"Bruno Postle","metadata":"{}"},{"issue_id":"homemaker-py-erc.5","depends_on_id":"homemaker-py-erc.1","type":"blocks","created_at":"2026-06-23T00:16:43Z","created_by":"Bruno Postle","metadata":"{}"}],"dependency_count":1,"dependent_count":0,"comment_count":0} {"id":"homemaker-py-2g5","title":"Rebuild occlusion/daylight/sun subsystem in Python (post-Phase-5, after optimisation fully native)","description":"DESIGN.md §6 port scope — a whole subsystem, not a term. quality_daylight (Leaf.pm:281-296) needs Urb::Misc::Sun + Urb::Field::Occlusion (+CIESky); quality_uncrinkliness also takes the occlusion object. Indoor spaces return 1 for daylight; cost is outdoor spaces + crinkliness. Port Sun_horizontal (262980-minute normalisation) and the occlusion wall set from Dom-\u003eWalls.","acceptance_criteria":"Daylight and crinkliness factors match Perl (float tolerance) across the corpus, including multi-storey cases","notes":"Re-scoped 2026-06-12: occlusion disabled in the Urb oracle instead of ported (see homemaker-py-gp2). Native fitness ships with simple crinkliness (illumination factor = 1, in homemaker-py-gnw). This issue is now the eventual Python occlusion rebuild, only after optimisation works entirely in Python. Restores outdoor-daylight and shaded-wall selection pressure.\nReframed 2026-06-17: orthogonal to epic homemaker-py-c4c. This is fitness FIDELITY (restoring daylight + shaded-wall selection pressure to match Perl), not search CAPABILITY — it changes what 'good' means, not the search's ability to find good. It will NOT improve final designs in the sense currently sought. Stays P4, deferred until the topology-search-quality epic lands and optimisation is fully native.","status":"open","priority":4,"issue_type":"feature","owner":"bruno@postle.net","created_at":"2026-06-11T23:38:25Z","created_by":"Bruno Postle","updated_at":"2026-06-17T19:14:48Z","dependency_count":0,"dependent_count":0,"comment_count":0} -{"_type":"memory","key":"cli-tool-style-prefer-python-m-homemaker-module","value":"CLI tool style: prefer python -m homemaker.module --parameters pattern, installable via pip install -e . with pyproject.toml entry_points. Not standalone bin/ scripts."} -{"_type":"memory","key":"homemaker-py-pythonpath-set-pythonpath-home-bruno-src","value":"homemaker-layout PYTHONPATH: package installed as 'homemaker-layout' via pip install -e . so 'import homemaker_layout' works from anywhere without PYTHONPATH. For running tests use 'python -m pytest' from project root /home/bruno/src/homemaker-layout (pyproject.toml adds src/ automatically). Never try pip show homemaker — that's the old homemaker-addon conflict."} -{"_type":"memory","key":"run-to-run-reproducibility-in-homemaker-layout-serial","value":"Run-to-run reproducibility in homemaker-layout: serial search (workers=1) is byte-for-byte deterministic; parallel (workers\u003e1) is now deterministic too AFTER fixing driver._run_batch to admit futures in submission order (was as_completed/completion order, bug xcy). Reproducibility holds only for a FIXED worker count — serial vs parallel differ because children-per-iteration is 1 vs n_workers (different batch granularity), which is expected, not a bug. The constructive seeder was NEVER nondeterministic: _assign_adjacency_aware has unique idx tiebreaks; comparing topologies with Python builtin hash() of the signature STRING is invalid (PYTHONHASHSEED salts str hashing per process) — use a stable hash (sha1) or genome.signature equality."} -{"_type":"memory","key":"user-preference-bruno-this-is-a-fedora-system","value":"User preference (Bruno): this is a Fedora system — NEVER install Python packages via pip without asking first; always ask whether to install the rpm via dnf (e.g. python3-cma) before considering pip. Applies to any dependency additions."} -{"_type":"memory","key":"adjacency-in-binary-slicing-tree-is-structural-not","value":"Adjacency in binary slicing tree is structural, not geometric: the inner-loop NM cannot fix topological adjacency failures. Two paths exist: (1) tree-sibling adjacency — a node is adjacent to its sibling in the tree; (2) cross-zone geometric adjacency — leaves from different subtrees that happen to share a boundary. Staircase/adjacency fails require a topology mutation that changes which nodes are siblings or which zones touch. This was proved empirically on programme-house: staircase fail from rot=0 layout could not be fixed by NM but was fixed by level_retype creating a two-C topology (2026-06-14/15)."} -{"_type":"memory","key":"multi-storey-staircase-consistency-when-dividing-or-retyping","value":"Multi-storey staircase consistency: when dividing or retyping a circulation (C) leaf at one level, the same structural change should be propagated to the matching leaf on ALL other storeys so the stair core path is maintained. The optimizer cannot fix staircase disruptions through trial-and-error geometry alone — it requires a synchronized multi-level operator that applies the same topology change to every storey simultaneously."} -{"_type":"memory","key":"programme-house-optimisation-result-2026-06-14-15","value":"Programme-house optimisation result (2026-06-14/15): best achievable is 1 fail (l1 wrong level, score ~0.005). 0 fails is geometrically impossible: l1 (min 27m²) must occupy ll (~23m²) at level 0, which eliminates the t3-adj-C provider; dividing ll into lll(l1)+llr(C) gives llr proportion ~6:1 (fails). Python memetic optimizer achieves 1 fail in 50k evals vs Perl optimiser's 2-3 fails. Winning topology: TWO C nodes at level 0 — ll(C) for t3-adj-C via geometric contact, rl(C) for staircase via tree-sibling adjacency to rrr(O). Best .dom: scratch/from-warmstart-fixed.dom and scratch/from-compound3-fixed.dom."} {"_type":"memory","key":"warm-x0-initialization-bug-pattern-when-a-topology","value":"warm_x0 initialization bug pattern: when a topology operator explicitly sets division ratios on a newly-created node (e.g. compound_fix sets node.division=[0.25,0.25] for t3), parent.ratios has no entry for that node (it was a leaf). warm_x0 defaults it to 0.5, corrupting the inner loop's starting point and making the operator invisible to lex comparison. Fix: only propagate child ratios for nodes where the parent node was NOT already divided; stale hidden nodes revealed by structural mutations (swap flipping b.below) must NOT contribute their pre-writeback values. See driver.py lines 259-267 (fixed 2026-06-14)."} -{"_type":"memory","key":"correction-to-urb-fitness-bug-memory-bruno-2026","value":"CORRECTION to urb-fitness-bug memory (Bruno, 2026-06-12): 'C' is NOT a 'covered' type — Is_Covered is a geometric predicate (indoor space above). Urb's generic types are canonically UPPERCASE: C=circulation, O=outside, S=sahn (get_space_types qw/C O S/; corpus is 100% uppercase, never 'c'/'o' leaves). The mixed-case designs that fired the latent ratio_type first-match bug were created by homemaker's own operator type pool emitting lowercase 'c'/'o' — fixed: driver/operators now emit uppercase generics only, and class checks use t[0].lower() in 'cos'. The Urb class-sum patch stays as defensive hardening (zero impact on canonical designs). Native port (3y7/gnw): treat type classes case-insensitively, generics canonically uppercase."} {"_type":"memory","key":"deceptive-valleys-in-topology-search-when-every-single","value":"Deceptive valleys in topology search: when every single-step mutation from a target state passes through a high-fail intermediary (e.g. level_fix displaces a room into 5+ new fails), a compound operator that atomically applies two coordinated changes can escape. Design compound operators to land on the low-fail state directly, bypassing the deceptive gradient. Programme-house example: level_compound_fix atomically moves the level-constrained room AND re-inserts the displaced room adjacent to C in one step (operators.py, 2026-06-14)."} +{"_type":"memory","key":"urb-oracle-nondeterminism-urb-fitness-pl-output-varies","value":"Urb oracle nondeterminism: urb-fitness.pl output varies run-to-run from Perl hash-order randomisation — .fails line ORDER shuffles (compare sorted, use oracle.Score.fail_lines) and the score float can flip by ~1 ULP (compare with math.isclose rel_tol=1e-12, never ==). Not a batching artifact; affects single runs too. Matters for the Phase 3 native-fitness parity gate (homemaker-py-uxz)."} +{"_type":"memory","key":"adjacency-in-binary-slicing-tree-is-structural-not","value":"Adjacency in binary slicing tree is structural, not geometric: the inner-loop NM cannot fix topological adjacency failures. Two paths exist: (1) tree-sibling adjacency — a node is adjacent to its sibling in the tree; (2) cross-zone geometric adjacency — leaves from different subtrees that happen to share a boundary. Staircase/adjacency fails require a topology mutation that changes which nodes are siblings or which zones touch. This was proved empirically on programme-house: staircase fail from rot=0 layout could not be fixed by NM but was fixed by level_retype creating a two-C topology (2026-06-14/15)."} +{"_type":"memory","key":"programme-house-optimisation-result-2026-06-14-15","value":"Programme-house optimisation result (2026-06-14/15): best achievable is 1 fail (l1 wrong level, score ~0.005). 0 fails is geometrically impossible: l1 (min 27m²) must occupy ll (~23m²) at level 0, which eliminates the t3-adj-C provider; dividing ll into lll(l1)+llr(C) gives llr proportion ~6:1 (fails). Python memetic optimizer achieves 1 fail in 50k evals vs Perl optimiser's 2-3 fails. Winning topology: TWO C nodes at level 0 — ll(C) for t3-adj-C via geometric contact, rl(C) for staircase via tree-sibling adjacency to rrr(O). Best .dom: scratch/from-warmstart-fixed.dom and scratch/from-compound3-fixed.dom."} {"_type":"memory","key":"proportion-aware-constructive-seeding-leu-2-12-2","value":"Proportion-aware constructive seeding (leu.2/§12.2): sizing seed cuts from target AREAS only regresses (thin slivers wreck aspect); you must ALSO pick each cut's rotation for child squareness. It is a convergence ACCELERATOR via a deeper local optimum around the constructed topology: wins where that topology is roughly right and budget is scarce (harbor -13%, maple -10% at 20k evals) but DELAYS small programmes where the seed must be restructured by undivide (programme-house regresses at fixed budget, yet reaches the floor given budget - speed, not asymptote). Default-on. Also: n_storeys must honour storey_minimum, not just level: keys (programme-house storey_minimum:2, all rooms level:0 - was seeded 1 storey short; cq1)."} -{"_type":"memory","key":"never-use-corpus-filenames-candidate-001-dom-candidate","value":"Never use corpus filenames (candidate-001.dom, candidate-002.dom, generated.dom, init.dom, etc.) as --output targets when running experiments. These are test fixtures. Always write experimental outputs to scratch/ or a timestamped path. Lesson from 2026-06-14: warm-start runs overwrote candidate-001/002.dom and broke graph tests."} +{"_type":"memory","key":"cli-tool-style-prefer-python-m-homemaker-module","value":"CLI tool style: prefer python -m homemaker.module --parameters pattern, installable via pip install -e . with pyproject.toml entry_points. Not standalone bin/ scripts."} +{"_type":"memory","key":"correction-to-urb-fitness-bug-memory-bruno-2026","value":"CORRECTION to urb-fitness-bug memory (Bruno, 2026-06-12): 'C' is NOT a 'covered' type — Is_Covered is a geometric predicate (indoor space above). Urb's generic types are canonically UPPERCASE: C=circulation, O=outside, S=sahn (get_space_types qw/C O S/; corpus is 100% uppercase, never 'c'/'o' leaves). The mixed-case designs that fired the latent ratio_type first-match bug were created by homemaker's own operator type pool emitting lowercase 'c'/'o' — fixed: driver/operators now emit uppercase generics only, and class checks use t[0].lower() in 'cos'. The Urb class-sum patch stays as defensive hardening (zero impact on canonical designs). Native port (3y7/gnw): treat type classes case-insensitively, generics canonically uppercase."} +{"_type":"memory","key":"homemaker-py-pythonpath-set-pythonpath-home-bruno-src","value":"homemaker-layout PYTHONPATH: package installed as 'homemaker-layout' via pip install -e . so 'import homemaker_layout' works from anywhere without PYTHONPATH. For running tests use 'python -m pytest' from project root /home/bruno/src/homemaker-layout (pyproject.toml adds src/ automatically). Never try pip show homemaker — that's the old homemaker-addon conflict."} {"_type":"memory","key":"strategy-decision-2026-06-12-bruno-occlusion-daylight","value":"Strategy decision 2026-06-12 (Bruno): occlusion/daylight is ORTHOGONAL to building a scalable optimiser. Disable it in Urb (env flag, homemaker-py-gp2) rather than port it; native fitness uses simple crinkliness (illumination factor = 1); rebuild occlusion in Python only after optimisation is fully native (homemaker-py-2g5, now P4). Consequence: all scores change when the flag flips — re-baseline corpus/.score, DESIGN \\$4.5 gains, gate bars at one clean boundary AFTER homemaker-py-1p0 closes; Phase-2 urb-evolve benchmark must run with the same flag."} {"_type":"memory","key":"urb-fitness-bug-found-fixed-2026-06-12","value":"Urb fitness bug found+fixed 2026-06-12 (patch in /home/bruno/src/urb, uncommitted): ProgrammeDriven.pm ratio_o/ratio_type grepped case-insensitively over the ratios hash and took the FIRST key — nondeterministic (x4.5 score swings) for designs with mixed-case type classes (both 'c' circulation and 'C' covered). Fixed to SUM the class (matches Is_Circulation//Is_Outside semantics); 35/35 corpus scores unchanged. CRITICAL for homemaker-py-3y7/gnw: the native port must implement class-SUM ratios. Building.pm has the same unpatched pattern (site-driven path, not used by our oracle). Also: the memetic search reward-hacked this bug before the fix — search results predating it are noise artifacts."} -{"_type":"memory","key":"urb-oracle-nondeterminism-urb-fitness-pl-output-varies","value":"Urb oracle nondeterminism: urb-fitness.pl output varies run-to-run from Perl hash-order randomisation — .fails line ORDER shuffles (compare sorted, use oracle.Score.fail_lines) and the score float can flip by ~1 ULP (compare with math.isclose rel_tol=1e-12, never ==). Not a batching artifact; affects single runs too. Matters for the Phase 3 native-fitness parity gate (homemaker-py-uxz)."} +{"_type":"memory","key":"multi-storey-staircase-consistency-when-dividing-or-retyping","value":"Multi-storey staircase consistency: when dividing or retyping a circulation (C) leaf at one level, the same structural change should be propagated to the matching leaf on ALL other storeys so the stair core path is maintained. The optimizer cannot fix staircase disruptions through trial-and-error geometry alone — it requires a synchronized multi-level operator that applies the same topology change to every storey simultaneously."} +{"_type":"memory","key":"never-use-corpus-filenames-candidate-001-dom-candidate","value":"Never use corpus filenames (candidate-001.dom, candidate-002.dom, generated.dom, init.dom, etc.) as --output targets when running experiments. These are test fixtures. Always write experimental outputs to scratch/ or a timestamped path. Lesson from 2026-06-14: warm-start runs overwrote candidate-001/002.dom and broke graph tests."} +{"_type":"memory","key":"run-to-run-reproducibility-in-homemaker-layout-serial","value":"Run-to-run reproducibility in homemaker-layout: serial search (workers=1) is byte-for-byte deterministic; parallel (workers\u003e1) is now deterministic too AFTER fixing driver._run_batch to admit futures in submission order (was as_completed/completion order, bug xcy). Reproducibility holds only for a FIXED worker count — serial vs parallel differ because children-per-iteration is 1 vs n_workers (different batch granularity), which is expected, not a bug. The constructive seeder was NEVER nondeterministic: _assign_adjacency_aware has unique idx tiebreaks; comparing topologies with Python builtin hash() of the signature STRING is invalid (PYTHONHASHSEED salts str hashing per process) — use a stable hash (sha1) or genome.signature equality."} +{"_type":"memory","key":"user-preference-bruno-this-is-a-fedora-system","value":"User preference (Bruno): this is a Fedora system — NEVER install Python packages via pip without asking first; always ask whether to install the rpm via dnf (e.g. python3-cma) before considering pip. Applies to any dependency additions."} diff --git a/src/homemaker_layout/driver.py b/src/homemaker_layout/driver.py index 1eccb99..cc7c3d2 100644 --- a/src/homemaker_layout/driver.py +++ b/src/homemaker_layout/driver.py @@ -187,9 +187,9 @@ def search( feasibility_filter: bool = False, feasibility_max_shape_fails: int | None = None, circ_divisor: int = 3, - leaf_sharing: bool = False, - leaf_share_factor: int = 2, - depth_balanced: bool = False, + leaf_sharing: bool = True, + leaf_share_factor: int = 3, + depth_balanced: bool = True, ) -> SearchResult: """Run the memetic loop from ``seed_root`` until ``budget`` oracle evaluations are consumed. Returns the best individual found; its ``root`` @@ -516,9 +516,9 @@ def search_staged( feasibility_filter: bool = False, feasibility_max_shape_fails: int | None = None, circ_divisor: int = 3, - leaf_sharing: bool = False, - leaf_share_factor: int = 2, - depth_balanced: bool = False, + leaf_sharing: bool = True, + leaf_share_factor: int = 3, + depth_balanced: bool = True, ) -> SearchResult: """Staged per-floor topology search (DESIGN.md §11.3, ``homemaker-py-c4c.3``).