Supersedes the previous commit's approach. Renaming harbor's four colliding
codes fixed one programme; tightening the matching rule fixes the rule, so a
room may be called anything. cr1/of/st1/st2 are restored and the examples are
byte-identical to their pre-§39 state -- which also means existing .dom
artefacts (evolved-3M*) stay valid, so migrate_ju3_rename.py is deleted.
The rule: Urb has exactly three GENERIC structural types (get_space_types:
qw/C O S/), the leaves the search creates. Measured across the corpus: 154 C,
110 O, 1 S, not one lowercase generic -- while every programme code is
lowercase, including single-character ones (r, t, m, n). Case is the
discriminator, not length. Every generic test was type[0].lower() in (...), a
case-insensitive PREFIX that swept up any programme code starting with those
letters; they now match the generic set exactly. 30 sites across dom, fitness,
graph, operators, programme, shapecurve and bubble.
NOT applied to the SEMANTIC prefixes: l/k/b/t classify programme codes by first
letter (graph.py builds bedroom<->toilet and kitchen<->living relations from
them) and stay prefix-based. Where the namespaces were mixed in one expression
they were split -- has_circulation's ("b","l","k","c") is three semantic
prefixes plus dom.is_circulation; access()'s ("l","c","s") is semantic l plus
the generic circulation set.
New: dom.GENERIC_{CIRCULATION,OUTSIDE,TYPES} + is_generic(); fitness.
_generic_class(), replacing the _t0 dispatch in quality_size/quality_width/
quality_proportion/value_rate -- the four terms that mattered most and that a
first sweep missed, since they dispatch through a t0 variable rather than an
inline test. graph._adjacency_target resolves a generic adjacency requirement
(programmes write "adjacency: [c, o]") to the generic set while every other
requirement keeps Perl's prefix semantics.
Two subtleties: S is in both generic sets but takes the OUTSIDE parameter
families -- a first translation tested circulation first and silently gave S
the circulation params, caught by test_get_space_params_sahn_proportion. And
validate_codes survives, narrowed to a code spelled exactly C/O/S, which is a
genuine ambiguity; merely starting with c/o/s is now fine.
Invariant asserted as a test: test_scoring_is_invariant_under_programme_code_
spelling relabels one tree and its config together and re-scores. Bit-identical
across 12 comparisons (6 seeds x collapse on/off).
Re-baseline (seed 1, 20k, original names): 58 fails (15 hard / 43 soft) against
the real 37-instance programme, with cr1 at 79.1 m2 vs declared 80 (was 32.9
and 17.1), of/st1/st2 all present and in band, and one fail naming any of them.
57 -> 58 on a 5-instance-harder programme is within noise: "did not regress".
Fallout (§39.5): 2g7.5's CP-SAT seeder win does not survive. Over 6 seeds --
harbor real 102/114 (cpsat loses), harbor old-effective 98/99 (tie, so the win
was already marginal), maple-court 156/144 (cpsat wins). maple is the control:
the solver did not regress, harbor's programme changed. Test xfail'd with that
reason plus a maple companion; both assign_solver flags stay default off.
Filed homemaker-py-w6x to re-check other narrow-margin harbor A/Bs.
345 passed, 1 xfailed, same 7 pre-existing fixture failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Closes homemaker-py-ju3. DESIGN.md §39.3.
The class: key from the bead's design was deliberately NOT built. Auditing
every use of the prefix rule first showed it runs deeper than c/o/s -- l/k/b/t
carry real adjacency semantics (graph.py builds bedroom<->toilet and
kitchen<->living relations from first characters) -- so re-plumbing the type
system would invalidate the whole corpus and every baseline, for a problem
whose damage is the silence, not the convention. Two findings made the smaller
fix sufficient: no corpus programme has ever declared a bare c/o/s code, so
check_space_counts' skip only ever discarded declared rooms; and nothing
references harbor's four codes in any adjacency or co_locate list.
- programme.validate_codes raises on a reserved-prefix code, with the full
explanation. Called from BOTH parse paths (programme._parse_spaces and
fitness.Fitness._load_programme parse conf["spaces"] independently, so
validating one would leave the other door open). l/k/b/t stay unreserved.
- harbor-house and harbor-house-l0 renamed: cr1->fr1, of->ao, st1->gs1,
st2->gs2. New prefixes are unused in harbor and semantically neutral, and
the two storage codes still share a prefix, preserving the structure
evaluate_building's per-code plot-ratio term depends on. name: unchanged.
- experiments/migrate_ju3_rename.py migrates .dom files written before the
rename (--check dry-runs). Pre-rename artefacts, notably evolved-3M*.dom,
must be migrated or their leaves read as unmatched generics.
- test_collapse_global's c/o/s exclusion test now uses a generic C leaf, which
is what the exclusion is actually for; it previously relied on a programme
code colliding, which is no longer possible.
Re-baseline (seed 1, 20k evals, same settings as §38's run): 57 fails against
the 32-instance effective programme -> 55 against the real 37-instance one,
with all five previously-lost room instances now placed inside their declared
sigma bands (fr1 87.2 vs declared 80, was 32.9/17.1; ao/gs1/gs2 were absent
entirely) and no failure naming any of the four codes. At one seed each,
57 vs 55 is within noise -- the robust result is the room placement, not the
count. Historical harbor numbers are not comparable to post-ju3 ones; filed
homemaker-py-t3s to restate 2v1's acceptance figure once evolved-3M is
migrated.
346 passed (+10 new), same 7 pre-existing fixture failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Builds path (b) from §26 -- a leaf permanently serving two DIFFERENT
compatible programme codes at once, extending leaf-sharing's same-code
multiplicity mechanism to different-but-compatible codes. Architect-declared
`co_locate` pairs (validated against interchangeable()'s S1-S4 bounds, no
transitive closure so the b3v chain problem can't recur), threaded through
graph.py's checks via a new leaf_codes() resolver and fitness.py's quality
terms (additive size, stricter-of-both width/proportion). Construction-time
only, gated behind `multi_use` (default OFF, bit-identical when off).
End-to-end A/B (20k evals x 3 seeds x 2 programmes) came back net negative:
harbor-house -4.0% but health-centre +24.5% worse (3/3 seeds), because
fusing different codes' shape targets via stricter-of-both can impose a
tighter joint constraint than either code needed alone, which the tightly-
packed health-centre programme can't absorb. Written up as DESIGN.md §33;
multi_use stays default OFF, no default-flip recommended.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
9o5 §7.5 escape hatch: a per-space `interchange: false` opt-out in
patterns.config removes a code from auto-derived interchange classes,
letting the architect veto a harmful grouping (harbor-house's transitive
8-code chain) without disabling superposition globally.
SpaceReq gains an `interchange` bool (default True). Honoured as an S0
short-circuit in interchangeable() and by filtering derive_interchange_
classes() input. Superpose default stays OFF regardless (xi7 verdict), so
this only bites when superposition is enabled on a real config.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M8566xAxTnwtJTkpXjYNZm
Interchangeable codes (similar size/width/proportion, compatible level/stack,
no adjacency edge) form equivalence classes derived from the programme. With
--superpose (default off), each fitness eval COLLAPSES every superposed leaf to
its best in-class usage via an optimal supply->demand assignment (brute force
<=C! within cap C=4, scipy Hungarian beyond), then scores the condensed types.
Because collapse re-types on the unmerged tree before all checks, counts /
adjacency / quality are unchanged downstream -- no Node field, no graph/operator
changes -- and default OFF is bit-identical.
- programme.py: derive_interchange_classes + interchangeable (S1-S4, locked
thresholds R_SIZE=1.5/R_WIDTH=1.3/R_PROP=1.5, CLASS_CAP=4)
- fitness.py: collapse_superposition, _best_assignment, _usage_quality;
superpose/superpose_class_cap conf knobs; collapse hooked into _evaluate_full
- driver.py/evolve.py: superpose flag plumbed beside leaf_sharing; --superpose
- tests/test_superposition.py: 17 tests (derivation, assignment, end-to-end)
Closes homemaker-py-9o5 (build); validation A/B is homemaker-py-xi7.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Size each constructive-seed cut from leaf TARGET areas (division=[f,f] gives
left area-fraction f) and pick each cut's rotation for child squareness — both
derived from target dims, topology/type assignment untouched. Area-only
regressed (slivers); rotation choice is what makes it pay.
End-to-end (20000 evals, 3 seeds, staged): harbor 85.3->74.0 (-13%, best 69),
maple-court 151.7->136.0 (-10%, best 126). PROP=0 reproduces the §11.7/§12.1
baselines exactly. programme-house regresses at fixed budget (deeper local
optimum walls off the undivide restructuring path) but a budget sweep shows
it's convergence speed, not a worse asymptote (PROP=1 reaches 1 fail at 150k).
Default-on (seed_proportion_aware=True, env PROP=1).
cq1: n_storeys now honours storey_minimum, not just level: keys — programme-house
(storey_minimum:2, all rooms level:0) was seeded one storey short and fell
through to plain search. New programme.storey_minimum()/n_storeys_for();
driver.search passes min_storeys to the seeder; search_staged routes on the max.
No-op for harbor/maple; programme-house single-stage 8.0->5.0.
New maple-court best (126) saved as generated.dom. 204 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Search the genome in causal dependency order. Stage 1 evolves a single-storey
base over the level-0 room set (programme auto-derived to a tempdir), ranked
with a substrate-readiness bonus (reserved core × divisible capacity) so the
base is selected as a good substrate, not just a good ground floor (anti-§4.2).
Stage 2 lifts the best base into a full multi-storey design — preserving the
inherited core, instantiating each upper storey's required set by construction —
and searches the deltas with the base mutable at low probability (base_p=0.15).
New: programme.{n_storeys_required,partition_rooms_by_storey,write_stage1_programme},
graph.substrate_readiness, operators.{lift_base_to_storeys,_pick_weighted_by_storey},
base_p threading, driver.search rank_bonus_fn/seed_factory/base_p hooks +
search_staged orchestrator, experiments/run_staged_search.py, tests/test_staging.py.
Result (harbor, 20000 evals, seed 0): staged 95 fails vs single-stage 105
(-10, -9.5%), gain in crinkliness 27->18 + edge 12->8. Anti-bungalow confirmed
(Stage-2 core moves all noop — core inherited, not carved). Programme-house
regression PASS (warmstart-2f4 still reaches whole-pop 1-fail).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
