Supersedes the previous commit's approach. Renaming harbor's four colliding
codes fixed one programme; tightening the matching rule fixes the rule, so a
room may be called anything. cr1/of/st1/st2 are restored and the examples are
byte-identical to their pre-§39 state -- which also means existing .dom
artefacts (evolved-3M*) stay valid, so migrate_ju3_rename.py is deleted.
The rule: Urb has exactly three GENERIC structural types (get_space_types:
qw/C O S/), the leaves the search creates. Measured across the corpus: 154 C,
110 O, 1 S, not one lowercase generic -- while every programme code is
lowercase, including single-character ones (r, t, m, n). Case is the
discriminator, not length. Every generic test was type[0].lower() in (...), a
case-insensitive PREFIX that swept up any programme code starting with those
letters; they now match the generic set exactly. 30 sites across dom, fitness,
graph, operators, programme, shapecurve and bubble.
NOT applied to the SEMANTIC prefixes: l/k/b/t classify programme codes by first
letter (graph.py builds bedroom<->toilet and kitchen<->living relations from
them) and stay prefix-based. Where the namespaces were mixed in one expression
they were split -- has_circulation's ("b","l","k","c") is three semantic
prefixes plus dom.is_circulation; access()'s ("l","c","s") is semantic l plus
the generic circulation set.
New: dom.GENERIC_{CIRCULATION,OUTSIDE,TYPES} + is_generic(); fitness.
_generic_class(), replacing the _t0 dispatch in quality_size/quality_width/
quality_proportion/value_rate -- the four terms that mattered most and that a
first sweep missed, since they dispatch through a t0 variable rather than an
inline test. graph._adjacency_target resolves a generic adjacency requirement
(programmes write "adjacency: [c, o]") to the generic set while every other
requirement keeps Perl's prefix semantics.
Two subtleties: S is in both generic sets but takes the OUTSIDE parameter
families -- a first translation tested circulation first and silently gave S
the circulation params, caught by test_get_space_params_sahn_proportion. And
validate_codes survives, narrowed to a code spelled exactly C/O/S, which is a
genuine ambiguity; merely starting with c/o/s is now fine.
Invariant asserted as a test: test_scoring_is_invariant_under_programme_code_
spelling relabels one tree and its config together and re-scores. Bit-identical
across 12 comparisons (6 seeds x collapse on/off).
Re-baseline (seed 1, 20k, original names): 58 fails (15 hard / 43 soft) against
the real 37-instance programme, with cr1 at 79.1 m2 vs declared 80 (was 32.9
and 17.1), of/st1/st2 all present and in band, and one fail naming any of them.
57 -> 58 on a 5-instance-harder programme is within noise: "did not regress".
Fallout (§39.5): 2g7.5's CP-SAT seeder win does not survive. Over 6 seeds --
harbor real 102/114 (cpsat loses), harbor old-effective 98/99 (tie, so the win
was already marginal), maple-court 156/144 (cpsat wins). maple is the control:
the solver did not regress, harbor's programme changed. Test xfail'd with that
reason plus a maple companion; both assign_solver flags stay default off.
Filed homemaker-py-w6x to re-check other narrow-margin harbor A/Bs.
345 passed, 1 xfailed, same 7 pre-existing fixture failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Closes homemaker-py-ju3. DESIGN.md §39.3.
The class: key from the bead's design was deliberately NOT built. Auditing
every use of the prefix rule first showed it runs deeper than c/o/s -- l/k/b/t
carry real adjacency semantics (graph.py builds bedroom<->toilet and
kitchen<->living relations from first characters) -- so re-plumbing the type
system would invalidate the whole corpus and every baseline, for a problem
whose damage is the silence, not the convention. Two findings made the smaller
fix sufficient: no corpus programme has ever declared a bare c/o/s code, so
check_space_counts' skip only ever discarded declared rooms; and nothing
references harbor's four codes in any adjacency or co_locate list.
- programme.validate_codes raises on a reserved-prefix code, with the full
explanation. Called from BOTH parse paths (programme._parse_spaces and
fitness.Fitness._load_programme parse conf["spaces"] independently, so
validating one would leave the other door open). l/k/b/t stay unreserved.
- harbor-house and harbor-house-l0 renamed: cr1->fr1, of->ao, st1->gs1,
st2->gs2. New prefixes are unused in harbor and semantically neutral, and
the two storage codes still share a prefix, preserving the structure
evaluate_building's per-code plot-ratio term depends on. name: unchanged.
- experiments/migrate_ju3_rename.py migrates .dom files written before the
rename (--check dry-runs). Pre-rename artefacts, notably evolved-3M*.dom,
must be migrated or their leaves read as unmatched generics.
- test_collapse_global's c/o/s exclusion test now uses a generic C leaf, which
is what the exclusion is actually for; it previously relied on a programme
code colliding, which is no longer possible.
Re-baseline (seed 1, 20k evals, same settings as §38's run): 57 fails against
the 32-instance effective programme -> 55 against the real 37-instance one,
with all five previously-lost room instances now placed inside their declared
sigma bands (fr1 87.2 vs declared 80, was 32.9/17.1; ao/gs1/gs2 were absent
entirely) and no failure naming any of the four codes. At one seed each,
57 vs 55 is within noise -- the robust result is the room placement, not the
count. Historical harbor numbers are not comparable to post-ju3 ones; filed
homemaker-py-t3s to restate 2v1's acceptance figure once evolved-3M is
migrated.
346 passed (+10 new), same 7 pre-existing fixture failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Builds path (b) from §26 -- a leaf permanently serving two DIFFERENT
compatible programme codes at once, extending leaf-sharing's same-code
multiplicity mechanism to different-but-compatible codes. Architect-declared
`co_locate` pairs (validated against interchangeable()'s S1-S4 bounds, no
transitive closure so the b3v chain problem can't recur), threaded through
graph.py's checks via a new leaf_codes() resolver and fitness.py's quality
terms (additive size, stricter-of-both width/proportion). Construction-time
only, gated behind `multi_use` (default OFF, bit-identical when off).
End-to-end A/B (20k evals x 3 seeds x 2 programmes) came back net negative:
harbor-house -4.0% but health-centre +24.5% worse (3/3 seeds), because
fusing different codes' shape targets via stricter-of-both can impose a
tighter joint constraint than either code needed alone, which the tightly-
packed health-centre programme can't absorb. Written up as DESIGN.md §33;
multi_use stays default OFF, no default-flip recommended.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
Previously level_add copied the top storey exactly, duplicating all
named programme rooms and immediately triggering space-count failures
for every room on the new floor. The lex outer-search comparison
(-n_fails, score) then always rejected the multi-storey child because
its fail count was far higher than the single-storey parent.
Fix: retype all named-room leaves on the new storey to generic C or O
before admitting the child. The outer search then retypes them
incrementally via the normal retype operator. This allows level_add to
produce designs with the same fail count as the parent (storey_minimum
fail removed, no duplication fails added), making the multi-storey
transition visible to the lex selector.
Result on programme-house cold start (init.dom, 100k evals, 4 workers):
before: 6 fails, single-storey, stuck after 40k evals
after: 4 fails, two-storey, still improving at 100k
Also adds examples/harbor-house/ from urb/examples for future runs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
