A toilet next to a sleeping room is a positive even with no door between
them (Brand): the adjacency is what makes a later knock-through possible.
The engine already scores it -- check_adjacency runs against the unfiltered
graph_base_pre -- but only where a programme declares it, and only
programme-house did.
Declared:
harbor-house t -> n bathrooms serve the Neighborhoods (communal
sleeping); both unpinned, 6 t / 5 n
maple-court tt -> r Upper Bathrooms among Individual Rooms, both
level 2, already 62% adjacent at seed time
NOT declared, and checking before declaring is what caught these:
maple t -> n is IMPOSSIBLE. Adjacency is evaluated per level, and maple
pins t to level 0, n to level 1. Declaring it would have added six
permanently unsatisfiable fails; the 0% seed-time rate was a hard
impossibility, not search difficulty. maple's ground floor has six
bathrooms and one sleeping room (Clinic Room x1) -- a ground-floor WC in
a communal building is public, so Brand does not apply anyway.
health-centre has no dedicated WC. The ruling was that a treatment room
"may give access to a toilet, but this would be a dedicated toilet"; t9
is a Public WC and t10 a Staff WC. Earning the credit needs a WC added to
the brief -- programme authoring, filed as homemaker-py-5nw.
Both declarations are reachable (best of 8 seeds 2/3 harbor, 2/2 maple), so
the search gets a gradient not a permanent penalty. evolved-3M-nols-3
84 -> 89 fails, all five the new requirement.
Cost: cpsat assignment ~7.5x slower on harbor (0.28 -> 2.11s per seed);
greedy, the default, unchanged at 0.06s. Ordinary runs pay nothing, but
39.5's cpsat-vs-greedy verdict was measured on a cheaper problem than the
corpus now poses -- filed as homemaker-py-vjd.
Two tests were over-fitted to the old seeds and are repaired to assert
their intent, not relaxed to pass: reassign now sweeps six constructive
seeds (seed 0's better-seeded design legitimately has nothing to improve,
5 of 6 others fire), and repair_circulation asserts that repair strictly
helps plus a >=85% bar rather than a sampled 100% hardened into a
guarantee (measured 25% -> 92%, stable over 6 and 12 seeds).
Closes homemaker-py-3qj.
Lint at parity (46); tests 379 passed, 0 failed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Ruling: corridors need daylight. Only rooms not occupied from day to day --
a cupboard, a store, a plant room -- do without it.
That overturns the classification 38.8 and 38.9 rested on. Those sections
exempted internal circulation, covered courtyards, WCs, laundries and
reception on my inference rather than any ruling. None are exempt: a
corridor is occupied all day every day, a waiting room likewise, a laundry
is a room people spend time in, a sterilisation room is a workplace.
Re-measured with the classification READ FROM THE CORPUS (a space is exempt
exactly when its own patterns.config declares crinkliness: none) instead of
inferred: 24 of 271 crinkliness fails (9%) were not defects -- not 136
(50%), not 61%. Overstated by about six times.
- uncrinkliness_circulation stays at [5/6, 1.1/3]. 38.10 called its
equality with the habitable target the purest case of an untuned value;
it is not a bug, it is the correct answer reached by default, since
corridors want daylight on the same terms as rooms.
- corpus declarations narrowed 18 -> 14. usage: utility was too coarse and
swept in Laundry Rooms and a Sterilisation Room. What remains is
storage, plant/mechanical, utilities closets and a records room.
- audit_crinkliness_truth.py rebuilt to read the classification from the
configs rather than infer it from usage:, so it cannot drift from the
ruling again.
- 38.8/38.9's inflated figures flagged in place, with 38.11 carrying the
correction.
What survives, none of it dependent on the classification: the 38.6
critique of the three modes; usage_daylight being mis-keyed; the 38.8 A/B
yardstick being wrong; and the per-space crinkliness mechanism itself.
ssz's opening measurement was right but its reading was wrong -- under this
ruling a buried leaf usually IS a defect, so scoring it zero is largely
correct. The narrowed remnant is that the score is FLAT rather than low, so
two equally-buried layouts cannot be ranked. Filed as homemaker-py-9gj; it
is a search-mechanics problem, not a calibration one.
Lint at parity (46); tests 369 passed, 2 pre-existing failures (ut5's stale
baseline and 1ue), both failing identically before this change.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Owner's ruling, and it corrects the design not just the classification: the
daylight requirement is already defined in the crinkliness. The gaussian's
compact side IS "too little exposed wall per unit floor"; its exposed side
is envelope cost. 38.9's proposed daylight: axis was redundant, and keying
it off usage: was worse than redundant.
What was actually missing: crinkliness is the only leaf quality factor with
no per-space target. size, width and proportion are all declared by the
space; crinkliness was one global number for every room in every building.
crinkliness: none -> no minimum-exposure requirement, may be buried
crinkliness: [t, s] -> this space's own target
key absent -> the global uncrinkliness target, as today
`none` clips the factor on the compact side, it does not switch it off:
over-exposure is still penalised, because a crinkly leaf costs envelope
whatever it holds. A store may be buried; a store may not be a starfish.
The mechanism is backward compatible -- an absent key resolves to the
global target, so shipping it changes no score. Behaviour changes only
where a config declares something, which keeps the objective change
visible per programme in config rather than hidden in a default.
Owner's classification: everything a person occupies wants a window, WCs
and reception/waiting/foyer included; only stores, plant, records and
laundry do not. migrate_crinkliness_key.py declared crinkliness: none on 18
corpus spaces. Crinkliness fails 271 -> 243, of which not-defects 136 (50%)
-> 108 (44%); the 28 that went are exactly the utility fails.
usage_daylight and needs_daylight are removed as mis-keyed, and
DAYLIGHT_USAGES with them -- a vocabulary value should exist only where the
engine treats it differently. The historical crinkliness_mode modes stay,
default off, so 38.6/38.8 remain reproducible.
uncrinkliness_circulation is now settable to none like any space, but its
default is left unchanged pending a ruling: corridors were not among the
groups ruled on and are 63% of the remaining phantom fails.
Lint at parity (46); tests 364 passed, same 7 pre-existing fixture failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Closes the second namespace sharing a first character with programme codes: the
usage prefixes b/t/l/k, under which a room silently inherited another room's
connectivity rules from its spelling.
usage is a plain, MANDATORY attribute of the space definition -- not a lookup
table. An interim design proposed a top-level usage_classes: table binding
author-coined names to behaviour; withdrawn, because an indirect name->behaviour
mapping living apart from the thing it describes is exactly the shape of the
prefix rule §39 exists to remove, it would be the only such table in a schema
where every other space property is a plain attribute, and the need it served
was already met -- "building specific" is about what a room is CALLED, and
name: is already free text.
Rule that settles it: a usage value exists iff the engine treats it differently
somewhere. Config selects among behaviours; it cannot invent them.
- programme.USAGES (living/kitchen/bedroom/toilet/utility/none) plus the
behaviour groupings PRIVATE_USAGES / PRIVATE_STRIPS / TOILET_STRIPS /
SOCIABLE_USAGES. Missing or unknown usage is a load error naming the code,
from BOTH parse paths.
- Code-level, never leaf-level: usage_of(leaf.type) is looked up fresh, so a
retype changes the class automatically. 51 sites assign leaf.type, and
share/share_type plus the r5a resurrection are the precedent for why
leaf-level attributes rot.
- graph.has_circulation takes the usage map and trims on declared class;
fitness.access and the public-access check likewise. fitness._t0 is DELETED --
no first-character type test remains anywhere in the codebase.
- utility is distinct from bedroom (same access requirements today) because it
is a different use and gives derive_interchange_classes an axis to relax on.
- A toilet now keeps its edge to a terminal room -- the Brand adjacency, which
the old b-before-t loop ordering severed.
- All 107 corpus entries migrated by experiments/migrate_usage_key.py, comments
and layout preserved.
MEASURED -- the connectivity model was ~4x too permissive. `none` is not
neutral: nothing is trimmed, so the graph may route THROUGH the room, and 34 of
52 codes had no class (Dental Surgery, Records Room, Utilities Closet all served
as corridors). Edges trimmed, prefix-inferred vs declared, 3 seeds each:
harbor-house 18 (9%) -> 79 (39%) inaccessible fails 0 -> 4
health-centre 12 (8%) -> 59 (40%) inaccessible fails 2 -> 3
maple-court 53 (17%) -> 123 (39%) inaccessible fails 1 -> 5
Re-baseline (seed 1, 20k, harbor): 58 fails (15h/43s) -> 61 (16h/45s), now
reporting 1-inaccessible-usable-space x2 plus level 0 and level 1 not connected.
The count rose because the objective got honest -- those failures were always
true of the layout and the old model could not see them. Every harbor number
before this was measured against a graph crediting routes through store
cupboards.
Sharpens §38.2: the objective pays x60-85 to delete circulation, and until now
the deleted corridors were not missed because storage stood in for them. With
that substitution gone, homemaker-py-2v1 is the remaining half -- and now
measurable, because the fails it should prevent actually fire.
350 passed (+5 new), same 7 pre-existing fixture failures, lint unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Supersedes the previous commit's approach. Renaming harbor's four colliding
codes fixed one programme; tightening the matching rule fixes the rule, so a
room may be called anything. cr1/of/st1/st2 are restored and the examples are
byte-identical to their pre-§39 state -- which also means existing .dom
artefacts (evolved-3M*) stay valid, so migrate_ju3_rename.py is deleted.
The rule: Urb has exactly three GENERIC structural types (get_space_types:
qw/C O S/), the leaves the search creates. Measured across the corpus: 154 C,
110 O, 1 S, not one lowercase generic -- while every programme code is
lowercase, including single-character ones (r, t, m, n). Case is the
discriminator, not length. Every generic test was type[0].lower() in (...), a
case-insensitive PREFIX that swept up any programme code starting with those
letters; they now match the generic set exactly. 30 sites across dom, fitness,
graph, operators, programme, shapecurve and bubble.
NOT applied to the SEMANTIC prefixes: l/k/b/t classify programme codes by first
letter (graph.py builds bedroom<->toilet and kitchen<->living relations from
them) and stay prefix-based. Where the namespaces were mixed in one expression
they were split -- has_circulation's ("b","l","k","c") is three semantic
prefixes plus dom.is_circulation; access()'s ("l","c","s") is semantic l plus
the generic circulation set.
New: dom.GENERIC_{CIRCULATION,OUTSIDE,TYPES} + is_generic(); fitness.
_generic_class(), replacing the _t0 dispatch in quality_size/quality_width/
quality_proportion/value_rate -- the four terms that mattered most and that a
first sweep missed, since they dispatch through a t0 variable rather than an
inline test. graph._adjacency_target resolves a generic adjacency requirement
(programmes write "adjacency: [c, o]") to the generic set while every other
requirement keeps Perl's prefix semantics.
Two subtleties: S is in both generic sets but takes the OUTSIDE parameter
families -- a first translation tested circulation first and silently gave S
the circulation params, caught by test_get_space_params_sahn_proportion. And
validate_codes survives, narrowed to a code spelled exactly C/O/S, which is a
genuine ambiguity; merely starting with c/o/s is now fine.
Invariant asserted as a test: test_scoring_is_invariant_under_programme_code_
spelling relabels one tree and its config together and re-scores. Bit-identical
across 12 comparisons (6 seeds x collapse on/off).
Re-baseline (seed 1, 20k, original names): 58 fails (15 hard / 43 soft) against
the real 37-instance programme, with cr1 at 79.1 m2 vs declared 80 (was 32.9
and 17.1), of/st1/st2 all present and in band, and one fail naming any of them.
57 -> 58 on a 5-instance-harder programme is within noise: "did not regress".
Fallout (§39.5): 2g7.5's CP-SAT seeder win does not survive. Over 6 seeds --
harbor real 102/114 (cpsat loses), harbor old-effective 98/99 (tie, so the win
was already marginal), maple-court 156/144 (cpsat wins). maple is the control:
the solver did not regress, harbor's programme changed. Test xfail'd with that
reason plus a maple companion; both assign_solver flags stay default off.
Filed homemaker-py-w6x to re-check other narrow-margin harbor A/Bs.
345 passed, 1 xfailed, same 7 pre-existing fixture failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Closes homemaker-py-ju3. DESIGN.md §39.3.
The class: key from the bead's design was deliberately NOT built. Auditing
every use of the prefix rule first showed it runs deeper than c/o/s -- l/k/b/t
carry real adjacency semantics (graph.py builds bedroom<->toilet and
kitchen<->living relations from first characters) -- so re-plumbing the type
system would invalidate the whole corpus and every baseline, for a problem
whose damage is the silence, not the convention. Two findings made the smaller
fix sufficient: no corpus programme has ever declared a bare c/o/s code, so
check_space_counts' skip only ever discarded declared rooms; and nothing
references harbor's four codes in any adjacency or co_locate list.
- programme.validate_codes raises on a reserved-prefix code, with the full
explanation. Called from BOTH parse paths (programme._parse_spaces and
fitness.Fitness._load_programme parse conf["spaces"] independently, so
validating one would leave the other door open). l/k/b/t stay unreserved.
- harbor-house and harbor-house-l0 renamed: cr1->fr1, of->ao, st1->gs1,
st2->gs2. New prefixes are unused in harbor and semantically neutral, and
the two storage codes still share a prefix, preserving the structure
evaluate_building's per-code plot-ratio term depends on. name: unchanged.
- experiments/migrate_ju3_rename.py migrates .dom files written before the
rename (--check dry-runs). Pre-rename artefacts, notably evolved-3M*.dom,
must be migrated or their leaves read as unmatched generics.
- test_collapse_global's c/o/s exclusion test now uses a generic C leaf, which
is what the exclusion is actually for; it previously relied on a programme
code colliding, which is no longer possible.
Re-baseline (seed 1, 20k evals, same settings as §38's run): 57 fails against
the 32-instance effective programme -> 55 against the real 37-instance one,
with all five previously-lost room instances now placed inside their declared
sigma bands (fr1 87.2 vs declared 80, was 32.9/17.1; ao/gs1/gs2 were absent
entirely) and no failure naming any of the four codes. At one seed each,
57 vs 55 is within noise -- the robust result is the room placement, not the
count. Historical harbor numbers are not comparable to post-ju3 ones; filed
homemaker-py-t3s to restate 2v1's acceptance figure once evolved-3M is
migrated.
346 passed (+10 new), same 7 pre-existing fixture failures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
Builds path (b) from §26 -- a leaf permanently serving two DIFFERENT
compatible programme codes at once, extending leaf-sharing's same-code
multiplicity mechanism to different-but-compatible codes. Architect-declared
`co_locate` pairs (validated against interchangeable()'s S1-S4 bounds, no
transitive closure so the b3v chain problem can't recur), threaded through
graph.py's checks via a new leaf_codes() resolver and fitness.py's quality
terms (additive size, stricter-of-both width/proportion). Construction-time
only, gated behind `multi_use` (default OFF, bit-identical when off).
End-to-end A/B (20k evals x 3 seeds x 2 programmes) came back net negative:
harbor-house -4.0% but health-centre +24.5% worse (3/3 seeds), because
fusing different codes' shape targets via stricter-of-both can impose a
tighter joint constraint than either code needed alone, which the tightly-
packed health-centre programme can't absorb. Written up as DESIGN.md §33;
multi_use stays default OFF, no default-flip recommended.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
Previously level_add copied the top storey exactly, duplicating all
named programme rooms and immediately triggering space-count failures
for every room on the new floor. The lex outer-search comparison
(-n_fails, score) then always rejected the multi-storey child because
its fail count was far higher than the single-storey parent.
Fix: retype all named-room leaves on the new storey to generic C or O
before admitting the child. The outer search then retypes them
incrementally via the normal retype operator. This allows level_add to
produce designs with the same fail count as the parent (storey_minimum
fail removed, no duplication fails added), making the multi-storey
transition visible to the lex selector.
Result on programme-house cold start (init.dom, 100k evals, 4 workers):
before: 6 fails, single-storey, stuck after 40k evals
after: 4 fails, two-storey, still improving at 100k
Also adds examples/harbor-house/ from urb/examples for future runs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude
