bruno/homemaker-layout
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
homemaker-layout/experiments
History
Claude 6405ca1a59
ssz: record the A/B result honestly -- not a pass at n=3 
Fixed-budget A/B (3000 evals, 3 seeds, harbor + maple, every arm scored
under stock urb so the permissive modes cannot win by deleting a fail
category).

usage_daylight's paired hard-fail deltas are harbor [0,-1,-10] and maple
[0,+2,-10]. The means (-3.7, -2.7) flatter it: the whole signal is seed 2
in both programmes, and seed 2 is the seed where stock itself does worst.
Two seeds in three are flat or slightly worse. On that seed soft rises as
much as hard falls (harbor -10h/+9s, maple -10h/+15s), so totals go
62->61 on harbor and 120->125 on maple.

Because the scoring is stock, that is a genuine trade of hard failures for
soft ones, not a relabelling -- progress under the tiered comparator, where
n_hard is primary, but a fail against this issue's acceptance criterion
("without inflating soft"). Which yardstick is right is now the live
question, and it is gvb's question as much as ssz's.

usage_daylight stays default off; undecided, not refuted. Higher-power run
(urb vs usage_daylight, 10 seeds) is running.

The diagnostic half stands independent of the search A/B: the objective
demands daylight of two thirds of the buried population that does not want
it, and 38.6's contrary null was an artefact of three modes that never
touched those leaves.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
2026-08-26 17:57:11 +00:00
..
results ssz: record the A/B result honestly -- not a pass at n=3 2026-08-26 17:57:11 +00:00
ab_cpsat_assign.py homemaker-py-2g7.5: CP-SAT exact room-code assignment (seeder + reassign op) 2026-08-04 09:19:36 +01:00
ab_crinkliness_mode_ssz.py ssz: daylight is required of rooms that do not need it 2026-08-26 16:45:10 +00:00
ab_shapecurve_prune.py homemaker-py-wkh: DP-exact hard pre-filter for driver.py's shape-feasibility prune 2026-08-03 21:10:28 +01:00
ab_shapecurve_warmstart.py homemaker-py-6xh: wire shape-curve DP into driver.py as an NM warm-start 2026-08-03 18:43:28 +01:00
ab_ssz_search.py ssz: daylight is required of rooms that do not need it 2026-08-26 16:45:10 +00:00
accept_innerloop.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
audit_programme_config.py §39.4 completion + §39.5 retraction + §39.6: the usage namespace is NOT clean 2026-08-26 10:09:14 +00:00
autodiff_spike.py Spike: torch-autodiff inner-loop ratio optimisation (homemaker-py-2ax) — negative 2026-08-01 10:26:43 +01:00
bakeoff_harbor.json Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_harbor.py Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_innerloop.json Bake-off: CMA-ES confirmed as inner-loop optimiser (homemaker-py-d0s) 2026-06-13 09:47:15 +01:00
bakeoff_innerloop.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
bakeoff_native.json Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_native.py Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bench_batch_oracle.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
benchmark_vs_urbevolve.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
diag_2f45907.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
diag_connectivity_yql.py §39.9: level-not-connected is destroyed by the resize, not by the search 2026-08-26 14:39:07 +00:00
diag_depth_balance.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_edge_too_long.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_exposure_frontage.py Frontage feasibility as a pre-flight check; retract the "3x short" claim 2026-08-26 16:20:52 +00:00
diag_leaf_shapefail.py erc.1: Diagnostic A — per-leaf shape-fail vs density (§13.1) 2026-06-23 22:06:04 +01:00
diag_leaf_sharing.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_residual_91f.py homemaker-py-91f: residual diagnostic on the current full default stack 2026-08-01 19:38:46 +01:00
diag_slack_localization.py erc.2: Diagnostic B — undersize-despite-slack localization (§13.2) 2026-06-23 22:47:34 +01:00
dump_areas.pl Scaffold homemaker-py with validated geometry port 2026-06-10 20:50:20 +01:00
dump_areas.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
dump_leaf_quality.pl Native fitness: leaf quality terms + cost model (homemaker-py-gnw) 2026-06-13 07:59:21 +01:00
genome_parity.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
leaf_parity.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
measure_seed_geometry.py Phase 7 §12.2: proportion-aware constructive seeding + storey_minimum fix (leu.2, cq1) 2026-06-20 14:04:42 +01:00
migrate_usage_key.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00
operator_locality.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
optimize_fullfitness.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
penalty_reshape.json Lexicographic outer-search comparison, preserve inner-loop cliff (homemaker-py-yg5) 2026-06-14 09:20:03 +01:00
penalty_reshape.py Lexicographic outer-search comparison, preserve inner-loop cliff (homemaker-py-yg5) 2026-06-14 09:20:03 +01:00
probe_harbor_floor.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
rebaseline_no_occlusion.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
refine_sweep.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
resolve_ratios.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
run_1s3_confirm.sh homemaker-py-1s3: multi-use leaves N=15 confirmation -- does not replicate 2026-08-01 08:52:24 +01:00
run_1s3_confirm_staged.sh homemaker-py-1s3: multi-use leaves N=15 confirmation -- does not replicate 2026-08-01 08:52:24 +01:00
run_6zy_ab.sh 6zy/§11.8: co-tune topology diversity × tournament pressure — null robust 2026-06-29 22:56:23 +01:00
run_8sh_ab.sh 8sh: insert/relocate-circulation repair operator (qi6 mechanism (a)) 2026-07-24 19:48:13 +01:00
run_9gp_ab.sh Phase 7 §12.3: 9gp A/B measured — NEGATIVE; close 9gp + epic leu 2026-06-21 07:21:51 +01:00
run_9yx_sweep.sh homemaker-py-9yx: health-centre — non-synthetic third example programme 2026-07-30 00:09:37 +01:00
run_and_capture_91f.py homemaker-py-91f: residual diagnostic on the current full default stack 2026-08-01 19:38:46 +01:00
run_c3g_ab.sh c3g: circ-per-room granularity knob (circ_divisor) + A/B harness 2026-06-21 21:10:18 +01:00
run_depthbal_ab.sh erc.4: depth-balanced construction mechanism + floor probe (§13.4) 2026-06-25 22:36:24 +01:00
run_e01_sweep.py e01: harbor-house beam-width larger-N confirmation (null) 2026-07-29 00:22:55 +01:00
run_f1d_ab.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_f1d_larger_n.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_f1d_w3_ab.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_interioro_ab.sh erc/ld2: interior-O light-well seeding — §13.6 positive on dense floors 2026-06-28 07:20:20 +01:00
run_island_ab.py psk/§14: island model — null (best-of-N at equal budget wins) 2026-06-29 06:20:29 +01:00
run_leafshare_ab.sh erc.3: explicit per-leaf multiplicity closes the leak; driver A/B wired (§13.3) 2026-06-24 18:16:17 +01:00
run_leu2_ab.sh Phase 7 §12.2: proportion-aware constructive seeding + storey_minimum fix (leu.2, cq1) 2026-06-20 14:04:42 +01:00
run_lj3_qjg_ab.sh lj3/qjg: larger-N + weight sweep finds bridge_circulation effect is noise 2026-07-25 12:20:22 +01:00
run_multiuse_ab.sh homemaker-py-1s3: multi-use leaves as permanent design goal (§26 path b) 2026-07-31 00:16:12 +01:00
run_qi6_ab.sh qi6: full-budget A/B for graded circulation-connectivity signal, negative result 2026-07-23 18:29:45 +01:00
run_search.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
run_search_scaled.py 6zy/§11.8: co-tune topology diversity × tournament pressure — null robust 2026-06-29 22:56:23 +01:00
run_shareedge_ab.sh hph/§13.8: share-aware edge-too-long cap — shared leaves no longer penalised for aggregate wall length 2026-06-28 21:24:51 +01:00
run_sharefactor_sweep.sh erc.7: leaf-sharing × depth-balancing synergy CONFIRMED end-to-end (§13.5) 2026-06-26 16:47:14 +01:00
run_staged_search.py homemaker-py-7ua: pin collapse_insearch=True in run_staged_search.py rescore 2026-08-05 10:08:04 +01:00
run_synergy_ab.sh erc.7: leaf-sharing × depth-balancing synergy CONFIRMED end-to-end (§13.5) 2026-06-26 16:47:14 +01:00
run_xyu_sweep.sh xyu: n=18 ruin_recreate N=15 confirmation — weakened, not resolved 2026-07-29 10:10:23 +01:00
run_y51_sweep.sh y51: synthetic room-count sweep finds no clean ruin_recreate size threshold 2026-07-26 15:35:03 +01:00
run_y51_sweep_ln.sh y51: synthetic room-count sweep finds no clean ruin_recreate size threshold 2026-07-26 15:35:03 +01:00
shapecurve_spike.py homemaker-py-2g7.4: fix shape-curve DP to be rotation-invariant 2026-08-03 07:06:48 +01:00
sweep_failtypes.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
tier_ab_2g7_3.py homemaker-py-2g7.3: hard/soft fail tiering behind --use-tiers flag 2026-08-02 16:00:39 +01:00
usage_map_proposal.yaml homemaker-py-sel: usage is a plain space attribute — drop the mapping table 2026-08-26 12:56:12 +00:00
validate_shapecurve.py homemaker-py-wkh: DP-exact hard pre-filter for driver.py's shape-feasibility prune 2026-08-03 21:10:28 +01:00
validate_shapecurve_multistorey.py homemaker-py-koo: multi-storey (below-link) support for the shape-curve DP 2026-08-03 23:30:18 +01:00
warm_vs_cold.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00