bruno/homemaker-layout
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
homemaker-layout/experiments
History
Claude f47dfe60af
Record the ecx A/B: directionally positive, not resolvable at N=6 
Harbor and maple, three 500k plateau starts x two RNG seeds, 8000 evals, all
arms scored under stock. Run against the pre-39.19 defaults, so "stock" is the
old objective.

  harbor  geomean          39.17 -> 39.00  1W/0L/5T  diff +0.167  MDD 0.428
  harbor  geomean+daylight 39.17 -> 39.00  1W/0L/5T  diff +0.167  MDD 0.428
  maple   geomean          60.50 -> 60.17  1W/1L/4T  diff +0.333  MDD 1.434
  maple   geomean+daylight 60.50 -> 60.00  1W/0L/5T  diff +0.500  MDD 1.285

Every margin sits below what N=6 can resolve (N ~= 26-67 needed). Unlike
39.13's ramp, which was an exact null with sd=0 and identical trajectories, the
arms here do diverge and all four land on the favourable side of zero -- worth
exactly what four coin-flips landing the same way is worth. Recorded so a later
run cannot cite it as evidence.

Also recorded: none of 39.13, 39.14 or 39.18 produced a measurable search
improvement at this budget. All were shipped on correctness grounds and 39.19
then required two of them outright. If the 39 objective changes pay off in
search terms, this corpus has not shown it yet.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
2026-09-06 07:38:23 +00:00
..
results Record the ecx A/B: directionally positive, not resolvable at N=6 2026-09-06 07:38:23 +00:00
ab_9gj_crinkliness.py Quality aggregation: divide out how many questions a leaf was asked 2026-09-05 18:57:00 +00:00
ab_cpsat_assign.py homemaker-py-2g7.5: CP-SAT exact room-code assignment (seeder + reassign op) 2026-08-04 09:19:36 +01:00
ab_crinkliness_mode_ssz.py ssz: crinkliness is declared per space; there is no daylight attribute 2026-08-28 22:39:09 +00:00
ab_report.py A/Bs now report what their sample could resolve 2026-08-29 19:51:47 +00:00
ab_shapecurve_prune.py homemaker-py-wkh: DP-exact hard pre-filter for driver.py's shape-feasibility prune 2026-08-03 21:10:28 +01:00
ab_shapecurve_warmstart.py homemaker-py-6xh: wire shape-curve DP into driver.py as an NM warm-start 2026-08-03 18:43:28 +01:00
ab_ssz_search.py A/Bs now report what their sample could resolve 2026-08-29 19:51:47 +00:00
accept_innerloop.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
audit_crinkliness_truth.py Owner's daylight ruling: corridors need it; retract the 61% headline 2026-08-28 23:14:21 +00:00
audit_programme_config.py Audit: ask whether a room spec is feasible AS DECLARED, not merely somewhere 2026-09-05 07:46:43 +00:00
autodiff_spike.py Spike: torch-autodiff inner-loop ratio optimisation (homemaker-py-2ax) — negative 2026-08-01 10:26:43 +01:00
bakeoff_harbor.json Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_harbor.py Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_innerloop.json Bake-off: CMA-ES confirmed as inner-loop optimiser (homemaker-py-d0s) 2026-06-13 09:47:15 +01:00
bakeoff_innerloop.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
bakeoff_native.json Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_native.py Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bench_batch_oracle.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
benchmark_vs_urbevolve.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
diag_2f45907.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
diag_connectivity_yql.py §39.9: level-not-connected is destroyed by the resize, not by the search 2026-08-26 14:39:07 +00:00
diag_depth_balance.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_edge_too_long.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_exposure_frontage.py Frontage feasibility as a pre-flight check; retract the "3x short" claim 2026-08-26 16:20:52 +00:00
diag_leaf_shapefail.py erc.1: Diagnostic A — per-leaf shape-fail vs density (§13.1) 2026-06-23 22:06:04 +01:00
diag_leaf_sharing.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_residual_91f.py homemaker-py-91f: residual diagnostic on the current full default stack 2026-08-01 19:38:46 +01:00
diag_slack_localization.py erc.2: Diagnostic B — undersize-despite-slack localization (§13.2) 2026-06-23 22:47:34 +01:00
dump_areas.pl Scaffold homemaker-py with validated geometry port 2026-06-10 20:50:20 +01:00
dump_areas.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
dump_leaf_quality.pl Native fitness: leaf quality terms + cost model (homemaker-py-gnw) 2026-06-13 07:59:21 +01:00
genome_parity.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
leaf_parity.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
measure_seed_geometry.py Phase 7 §12.2: proportion-aware constructive seeding + storey_minimum fix (leu.2, cq1) 2026-06-20 14:04:42 +01:00
migrate_crinkliness_key.py ssz: crinkliness is declared per space; there is no daylight attribute 2026-08-28 22:39:09 +00:00
migrate_usage_key.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00
operator_locality.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
optimize_fullfitness.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
penalty_reshape.json Lexicographic outer-search comparison, preserve inner-loop cliff (homemaker-py-yg5) 2026-06-14 09:20:03 +01:00
penalty_reshape.py Lexicographic outer-search comparison, preserve inner-loop cliff (homemaker-py-yg5) 2026-06-14 09:20:03 +01:00
probe_harbor_floor.py Staged harness re-scored under a different objective than it searched 2026-08-29 12:11:38 +00:00
rebaseline_no_occlusion.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
refine_sweep.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
rerun_1ph_protocol.sh Harbor A/Bs at n=3 could never resolve their own margins 2026-08-29 19:34:30 +00:00
resolve_ratios.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
run_1s3_confirm.sh homemaker-py-1s3: multi-use leaves N=15 confirmation -- does not replicate 2026-08-01 08:52:24 +01:00
run_1s3_confirm_staged.sh homemaker-py-1s3: multi-use leaves N=15 confirmation -- does not replicate 2026-08-01 08:52:24 +01:00
run_6zy_ab.sh 6zy/§11.8: co-tune topology diversity × tournament pressure — null robust 2026-06-29 22:56:23 +01:00
run_8sh_ab.sh 8sh: insert/relocate-circulation repair operator (qi6 mechanism (a)) 2026-07-24 19:48:13 +01:00
run_9gp_ab.sh Phase 7 §12.3: 9gp A/B measured — NEGATIVE; close 9gp + epic leu 2026-06-21 07:21:51 +01:00
run_9yx_sweep.sh homemaker-py-9yx: health-centre — non-synthetic third example programme 2026-07-30 00:09:37 +01:00
run_and_capture_91f.py homemaker-py-91f: residual diagnostic on the current full default stack 2026-08-01 19:38:46 +01:00
run_c3g_ab.sh c3g: circ-per-room granularity knob (circ_divisor) + A/B harness 2026-06-21 21:10:18 +01:00
run_coldstart_baseline.py coldstart runner: commit only its own artefacts, not the whole tree 2026-08-29 19:40:00 +00:00
run_depthbal_ab.sh erc.4: depth-balanced construction mechanism + floor probe (§13.4) 2026-06-25 22:36:24 +01:00
run_e01_sweep.py e01: harbor-house beam-width larger-N confirmation (null) 2026-07-29 00:22:55 +01:00
run_f1d_ab.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_f1d_larger_n.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_f1d_w3_ab.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_interioro_ab.sh erc/ld2: interior-O light-well seeding — §13.6 positive on dense floors 2026-06-28 07:20:20 +01:00
run_island_ab.py psk/§14: island model — null (best-of-N at equal budget wins) 2026-06-29 06:20:29 +01:00
run_leafshare_ab.sh erc.3: explicit per-leaf multiplicity closes the leak; driver A/B wired (§13.3) 2026-06-24 18:16:17 +01:00
run_leu2_ab.sh Phase 7 §12.2: proportion-aware constructive seeding + storey_minimum fix (leu.2, cq1) 2026-06-20 14:04:42 +01:00
run_lj3_qjg_ab.sh lj3/qjg: larger-N + weight sweep finds bridge_circulation effect is noise 2026-07-25 12:20:22 +01:00
run_multiuse_ab.sh homemaker-py-1s3: multi-use leaves as permanent design goal (§26 path b) 2026-07-31 00:16:12 +01:00
run_qi6_ab.sh qi6: full-budget A/B for graded circulation-connectivity signal, negative result 2026-07-23 18:29:45 +01:00
run_search.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
run_search_scaled.py 6zy/§11.8: co-tune topology diversity × tournament pressure — null robust 2026-06-29 22:56:23 +01:00
run_shareedge_ab.sh hph/§13.8: share-aware edge-too-long cap — shared leaves no longer penalised for aggregate wall length 2026-06-28 21:24:51 +01:00
run_sharefactor_sweep.sh erc.7: leaf-sharing × depth-balancing synergy CONFIRMED end-to-end (§13.5) 2026-06-26 16:47:14 +01:00
run_staged_search.py Staged harness re-scored under a different objective than it searched 2026-08-29 12:11:38 +00:00
run_synergy_ab.sh erc.7: leaf-sharing × depth-balancing synergy CONFIRMED end-to-end (§13.5) 2026-06-26 16:47:14 +01:00
run_xyu_sweep.sh xyu: n=18 ruin_recreate N=15 confirmation — weakened, not resolved 2026-07-29 10:10:23 +01:00
run_y51_sweep.sh y51: synthetic room-count sweep finds no clean ruin_recreate size threshold 2026-07-26 15:35:03 +01:00
run_y51_sweep_ln.sh y51: synthetic room-count sweep finds no clean ruin_recreate size threshold 2026-07-26 15:35:03 +01:00
shapecurve_spike.py homemaker-py-2g7.4: fix shape-curve DP to be rotation-invariant 2026-08-03 07:06:48 +01:00
sweep_failtypes.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
tier_ab_2g7_3.py homemaker-py-2g7.3: hard/soft fail tiering behind --use-tiers flag 2026-08-02 16:00:39 +01:00
usage_map_proposal.yaml homemaker-py-sel: usage is a plain space attribute — drop the mapping table 2026-08-26 12:56:12 +00:00
validate_shapecurve.py homemaker-py-wkh: DP-exact hard pre-filter for driver.py's shape-feasibility prune 2026-08-03 21:10:28 +01:00
validate_shapecurve_multistorey.py homemaker-py-koo: multi-storey (below-link) support for the shape-curve DP 2026-08-03 23:30:18 +01:00
warm_vs_cold.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00