homemaker-layout/tests
Claude f5612ce06c
Pre-flight: check the ground floor's frontage, not the per-storey average
39.16 relocated the crinkliness residual to a plan-form question. Four
measurements answer it, and two of them refute the premises 773 was filed on.

The search DOES build courtyards -- harbor 8 (273 m2), maple 16 (404 m2),
health-centre 13 (107 m2) over three seeds -- and they work: of 524 lit edges
44% come from the plot wall, 30% from a courtyard, 26% from a perimeter void,
and a courtyard supplies at least one side for 53% of the two-aspect leaves.
No operator is missing. (The shape-curve DP does NOT model exposure --
shapecurve.py:25 -- but per 38.24 it fires ~8 times in 500k evals, so that gap
is not what is costing anything.)

The answer is per-storey. Comparing each storey's demand, sum A_i/(1.6202*h),
with the lit wall its leaves actually hold: every harbor and maple ground floor
is below 1.0 and every top floor above 1.2, and the ratio predicts the fail
rate almost exactly -- above ~1.2 near-zero fails, below 1.0 40-55% of the
storey. health-centre and programme-house sit at 1.6-4.2 throughout and fail
essentially nothing.

That corrects 39.11, which divided demand evenly across storeys and concluded
harbor and maple were frontage-feasible "with room to spare". Programmes pin
rooms to level 0 and the ground floor cannot set itself back to buy perimeter:
harbor's pinned 347 m2 needs 71.4 m against the plot's 53.0 m, maple's 414 m2
needs 85.2 m against 55.0 m, while health-centre and programme-house have 51.0
and 14.2 m spare. Same ordering as the corpus fail counts, and fixed before any
search runs. The averaged check is not just weaker: on maple it asks for a
22 m2 courtyard where the ground floor needs 57 m2.

New third _preflight check, advisory like the others, silent on the two
programmes with slack. tests/test_evolve_preflight.py covers all three checks
and asserts the ground-floor figure exceeds the averaged one -- if they ever
agree, one has stopped earning its place. 39.11 annotated in place.

Also recorded, not acted on: the open space is on the wrong storey (harbor puts
50 m2 of courtyard on the starved ground floor and 223 m2 on the surplus first
floor), because value_rate pays an outside leaf above ground value_supported =
300 -- a room's rate -- against a cost of 110, with nothing tying its value to
whether it illuminates anything. Filed as homemaker-py-ecx.

411 passed, 72 skipped.

Refs homemaker-py-773.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
2026-09-05 17:46:52 +00:00
..
_helpers.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00
test_collapse_global.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00
test_collapse_insearch.py Replace the stale 15-fail acceptance target with the cold-start baseline 2026-09-04 17:16:10 +00:00
test_compose.py §39.4: tighten generic-type matching, reverting the harbor rename 2026-08-26 09:45:28 +00:00
test_conn_grade.py qi6: graded circulation-connectivity signal (§18) 2026-07-18 18:44:24 +01:00
test_cpsat.py homemaker-py-2g7.5: CP-SAT exact room-code assignment (seeder + reassign op) 2026-08-04 09:19:36 +01:00
test_dom_corpus.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00
test_driver.py n_workers is an algorithm parameter, not noise 2026-08-29 12:52:33 +00:00
test_evolve_cli.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
test_evolve_preflight.py Pre-flight: check the ground floor's frontage, not the per-storey average 2026-09-05 17:46:52 +00:00
test_fitness.py Make both failing tests assert their intent, not stale artefacts 2026-08-29 07:11:25 +00:00
test_fitness_crinkliness.py Make the crinkliness factor one-sided: stop billing the daylit wall twice 2026-09-05 07:27:02 +00:00
test_genome.py Phase 6 §11.5: structural niching + restarts — negative result (c4c.5) 2026-06-18 23:42:39 +01:00
test_geometry.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
test_graph.py Missing-space cascade no longer weighted by YAML verbosity 2026-08-29 09:33:40 +00:00
test_innerloop.py Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
test_multi_use.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00
test_operators.py Recover most of the cpsat test-suite cost; keep the part that is real 2026-08-29 18:55:54 +00:00
test_oracle.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
test_programme.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00
test_shapecurve.py Shape-curve DP models leaf-sharing, so it can fire on real runs 2026-08-29 21:36:45 +00:00
test_staging.py §39.4: tighten generic-type matching, reverting the harbor rename 2026-08-26 09:45:28 +00:00
test_superposition.py §39.7: access requirements become a declared usage: attribute (homemaker-py-sel) 2026-08-26 13:39:41 +00:00