homemaker-layout/experiments
Claude fd9802e499
DESIGN.md §39: config audit — programme codes collide with the c/o/s type namespace
Answers "are any config requirements actively fighting the engine". One is.

§39.1 NEGATIVE (recorded): no room spec in any corpus programme is internally
contradictory. Using shapecurve.leaf_constraints' validated FAIL_THRESHOLD
inversions, every code admits an (area, aspect) satisfying size, width,
proportion and crinkliness at once, and none needs more than one exposed side.
The "estimated targets are mutually unsatisfiable" hypothesis is falsified.

§39.2 SEVERE: Urb's type system is prefix-based (c = circulation, o/s =
outside) and programme codes share that namespace. A code starting with those
letters is silently reinterpreted, with three unannounced consequences:
check_space_counts SKIPS it outright (never required, no missing or too-many
fail); get_space_params returns generic *_circulation/*_outside params before
consulting self.spaces; and is_circulation/is_outside flip, changing value
rate, crinkliness exemption, and whether it supplies daylight to neighbours.

harbor-house is affected (maple-court, health-centre, programme-house are
clean): cr1 "Common Room with Fireplace" has all three declared targets
overridden (size 80.0 -> 0.0/14.0) and is valued at 50/m2 not 300; of x2 and
st1/st2 lose width/proportion and are treated as outside space. 5 of 37 room
instances (14%) are silently optional.

Measured: the two cr1 leaves converged to 32.9 and 17.1 m2 against a declared
80, with no too-many-spaces fail despite count:1; of/st1/st2 are absent from
the result with zero fails. Compounds with §38.2 -- the largest room in the
programme sits on the wrong side of the x6 circulation value gap, so the
objective is paid to shrink it.

Benchmark validity: every harbor-house fail count in this document was
measured against a 32-instance effective programme, not the 37 its config
declares.

Adds experiments/audit_programme_config.py (namespace + satisfiability
reports). Filed homemaker-py-ju3 (P0). No src changes; 336 passed, same 7
pre-existing fixture failures.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MJ84Feep79Hhm3E4zZJmnB
2026-08-26 08:27:49 +00:00
..
results homemaker-py-2g7.5: full acceptance-criteria A/B (harbor+maple, 3 seeds, 20k budget) 2026-08-05 00:01:00 +01:00
ab_cpsat_assign.py homemaker-py-2g7.5: CP-SAT exact room-code assignment (seeder + reassign op) 2026-08-04 09:19:36 +01:00
ab_crinkliness_mode_ssz.py §38.2 refinement: connectivity is under-priced ~3x, not just a crinkliness bug 2026-08-26 07:40:37 +00:00
ab_shapecurve_prune.py homemaker-py-wkh: DP-exact hard pre-filter for driver.py's shape-feasibility prune 2026-08-03 21:10:28 +01:00
ab_shapecurve_warmstart.py homemaker-py-6xh: wire shape-curve DP into driver.py as an NM warm-start 2026-08-03 18:43:28 +01:00
accept_innerloop.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
audit_programme_config.py DESIGN.md §39: config audit — programme codes collide with the c/o/s type namespace 2026-08-26 08:27:49 +00:00
autodiff_spike.py Spike: torch-autodiff inner-loop ratio optimisation (homemaker-py-2ax) — negative 2026-08-01 10:26:43 +01:00
bakeoff_harbor.json Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_harbor.py Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_innerloop.json Bake-off: CMA-ES confirmed as inner-loop optimiser (homemaker-py-d0s) 2026-06-13 09:47:15 +01:00
bakeoff_innerloop.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
bakeoff_native.json Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bakeoff_native.py Swap inner loop default from CMA-ES to Nelder-Mead (homemaker-py-d6d) 2026-06-14 08:51:22 +01:00
bench_batch_oracle.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
benchmark_vs_urbevolve.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
diag_2f45907.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
diag_depth_balance.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_edge_too_long.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_exposure_frontage.py DESIGN.md §38: the plateau is an objective-gradient problem, not a search problem 2026-08-25 23:18:20 +00:00
diag_leaf_shapefail.py erc.1: Diagnostic A — per-leaf shape-fail vs density (§13.1) 2026-06-23 22:06:04 +01:00
diag_leaf_sharing.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
diag_residual_91f.py homemaker-py-91f: residual diagnostic on the current full default stack 2026-08-01 19:38:46 +01:00
diag_slack_localization.py erc.2: Diagnostic B — undersize-despite-slack localization (§13.2) 2026-06-23 22:47:34 +01:00
dump_areas.pl Scaffold homemaker-py with validated geometry port 2026-06-10 20:50:20 +01:00
dump_areas.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
dump_leaf_quality.pl Native fitness: leaf quality terms + cost model (homemaker-py-gnw) 2026-06-13 07:59:21 +01:00
genome_parity.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
leaf_parity.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
measure_seed_geometry.py Phase 7 §12.2: proportion-aware constructive seeding + storey_minimum fix (leu.2, cq1) 2026-06-20 14:04:42 +01:00
operator_locality.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
optimize_fullfitness.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
penalty_reshape.json Lexicographic outer-search comparison, preserve inner-loop cliff (homemaker-py-yg5) 2026-06-14 09:20:03 +01:00
penalty_reshape.py Lexicographic outer-search comparison, preserve inner-loop cliff (homemaker-py-yg5) 2026-06-14 09:20:03 +01:00
probe_harbor_floor.py x3b/§13.10: productionise leaf-sharing — per-code share grain + CLI wiring 2026-06-28 22:04:35 +01:00
rebaseline_no_occlusion.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
refine_sweep.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
resolve_ratios.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
run_1s3_confirm.sh homemaker-py-1s3: multi-use leaves N=15 confirmation -- does not replicate 2026-08-01 08:52:24 +01:00
run_1s3_confirm_staged.sh homemaker-py-1s3: multi-use leaves N=15 confirmation -- does not replicate 2026-08-01 08:52:24 +01:00
run_6zy_ab.sh 6zy/§11.8: co-tune topology diversity × tournament pressure — null robust 2026-06-29 22:56:23 +01:00
run_8sh_ab.sh 8sh: insert/relocate-circulation repair operator (qi6 mechanism (a)) 2026-07-24 19:48:13 +01:00
run_9gp_ab.sh Phase 7 §12.3: 9gp A/B measured — NEGATIVE; close 9gp + epic leu 2026-06-21 07:21:51 +01:00
run_9yx_sweep.sh homemaker-py-9yx: health-centre — non-synthetic third example programme 2026-07-30 00:09:37 +01:00
run_and_capture_91f.py homemaker-py-91f: residual diagnostic on the current full default stack 2026-08-01 19:38:46 +01:00
run_c3g_ab.sh c3g: circ-per-room granularity knob (circ_divisor) + A/B harness 2026-06-21 21:10:18 +01:00
run_depthbal_ab.sh erc.4: depth-balanced construction mechanism + floor probe (§13.4) 2026-06-25 22:36:24 +01:00
run_e01_sweep.py e01: harbor-house beam-width larger-N confirmation (null) 2026-07-29 00:22:55 +01:00
run_f1d_ab.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_f1d_larger_n.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_f1d_w3_ab.sh f1d: ruin-and-recreate LNS operator, validated positive on programme-house 2026-07-26 09:31:42 +01:00
run_interioro_ab.sh erc/ld2: interior-O light-well seeding — §13.6 positive on dense floors 2026-06-28 07:20:20 +01:00
run_island_ab.py psk/§14: island model — null (best-of-N at equal budget wins) 2026-06-29 06:20:29 +01:00
run_leafshare_ab.sh erc.3: explicit per-leaf multiplicity closes the leak; driver A/B wired (§13.3) 2026-06-24 18:16:17 +01:00
run_leu2_ab.sh Phase 7 §12.2: proportion-aware constructive seeding + storey_minimum fix (leu.2, cq1) 2026-06-20 14:04:42 +01:00
run_lj3_qjg_ab.sh lj3/qjg: larger-N + weight sweep finds bridge_circulation effect is noise 2026-07-25 12:20:22 +01:00
run_multiuse_ab.sh homemaker-py-1s3: multi-use leaves as permanent design goal (§26 path b) 2026-07-31 00:16:12 +01:00
run_qi6_ab.sh qi6: full-budget A/B for graded circulation-connectivity signal, negative result 2026-07-23 18:29:45 +01:00
run_search.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
run_search_scaled.py 6zy/§11.8: co-tune topology diversity × tournament pressure — null robust 2026-06-29 22:56:23 +01:00
run_shareedge_ab.sh hph/§13.8: share-aware edge-too-long cap — shared leaves no longer penalised for aggregate wall length 2026-06-28 21:24:51 +01:00
run_sharefactor_sweep.sh erc.7: leaf-sharing × depth-balancing synergy CONFIRMED end-to-end (§13.5) 2026-06-26 16:47:14 +01:00
run_staged_search.py homemaker-py-7ua: pin collapse_insearch=True in run_staged_search.py rescore 2026-08-05 10:08:04 +01:00
run_synergy_ab.sh erc.7: leaf-sharing × depth-balancing synergy CONFIRMED end-to-end (§13.5) 2026-06-26 16:47:14 +01:00
run_xyu_sweep.sh xyu: n=18 ruin_recreate N=15 confirmation — weakened, not resolved 2026-07-29 10:10:23 +01:00
run_y51_sweep.sh y51: synthetic room-count sweep finds no clean ruin_recreate size threshold 2026-07-26 15:35:03 +01:00
run_y51_sweep_ln.sh y51: synthetic room-count sweep finds no clean ruin_recreate size threshold 2026-07-26 15:35:03 +01:00
shapecurve_spike.py homemaker-py-2g7.4: fix shape-curve DP to be rotation-invariant 2026-08-03 07:06:48 +01:00
sweep_failtypes.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00
tier_ab_2g7_3.py homemaker-py-2g7.3: hard/soft fail tiering behind --use-tiers flag 2026-08-02 16:00:39 +01:00
validate_shapecurve.py homemaker-py-wkh: DP-exact hard pre-filter for driver.py's shape-feasibility prune 2026-08-03 21:10:28 +01:00
validate_shapecurve_multistorey.py homemaker-py-koo: multi-storey (below-link) support for the shape-curve DP 2026-08-03 23:30:18 +01:00
warm_vs_cold.py Rename package: homemaker → homemaker-layout 2026-06-14 08:18:06 +01:00