Build a torch-differentiable local proxy for the ratio-to-fitness path (exact
port of geometry.py's coordinate recursion + the 5 continuous per-leaf quality
factors, with discrete/structural facts frozen from a real fitness.py
snapshot and the 0.5^n cliff relaxed to a sigmoid) and compare Adam ascent
against nm_search on frozen topologies from programme-house and harbor-house.
Result: ~30-35x slower per unit of search progress than nm_search at both
6 DOF and 36 DOF (per-op torch tensor dispatch overhead with no batching
opportunity, plus snapshot/resnapshot cost on par with a full oracle eval),
and no better quality at matched budget. A step-size sensitivity check
confirmed the flagged 0.5^n cliff risk is real, but autodiff doesn't make the
gradient direction any cheaper to obtain here. Not recommended; kept as
reference only, not wired into innerloop.py. Full writeup in DESIGN.md §34.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
The N=3 A/B (previous commits) found the precision-weighted shape
combination improved both example programmes (harbor-house -1.4%,
health-centre -13.9%), but N=3 is a thin sample by this project's own
standard (xyu/9yx use N=15). Two confirmations:
- N=15, plain search, budget=3000 (mirrors xyu/9yx's own protocol exactly):
both programmes trend NEGATIVE (harbor +6.1%, health-centre +6.6%,
Wilcoxon p=0.044)
- N=15, staged search, budget=20000 (true same-conditions replication --
identical to the original A/B except seed count): both programmes AGAIN
trend negative (harbor +6.6% p=0.15, health-centre +4.7% p=0.48)
The same-conditions replication disagrees with the original result's
direction on both programmes. Conclusion: the N=3 positive signal was
sampling noise, not a real effect -- health-centre's -13.9% was driven
substantially by one seed (71->43 fails) that didn't hold up.
multi_use stays default OFF and is not recommended even as a promising
lever -- this is a clean NULL, closing out both halves of §26's original
multi-use-leaves question (path a was NULL/NEGATIVE, path b is NULL after
replication). Mechanism itself is unchanged, complete, and fully tested.
DESIGN.md §33 rewritten with all three measurements and the honest verdict.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
Follow-up to the previous commit: user flagged that quality_width/
quality_proportion's "stricter of both" (max target, min sigma) combination
for a fused leaf's two codes was an ad hoc hack. Tried two more principled
alternatives and A/B'd all three against the harbor-house/health-centre
example programmes (20k evals x 3 seeds each):
1. stricter-of-both (original) -> health-centre +24.5% worse
2. precision-weighted Gaussian product -> health-centre -13.9% better
3. mixture (max of two Gaussians) -> health-centre +20.4% worse
Landed #2 (fitness._gaussian_product): combining two Gaussian evidence
sources about the same quantity via precision-weighting gives an
intermediate target with a narrower spread, unlike the naive max/min hack.
#3's building block (_clipped_gaussian) is kept, documented, and unit-tested
as a recorded negative alternative -- somewhat counterintuitively, the more
philosophically appealing "let the leaf collapse toward whichever code fits"
mixture model was empirically worse, because max() lets a leaf score 1.0 by
satisfying only the weaker of the two codes' targets.
multi_use stays default OFF -- the precision-weighted result improves both
example programmes on average but isn't the clean sweep needed for a
default flip (harbor-house loses 1/3 seeds). DESIGN.md §33 rewritten with
the full three-way comparison.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
Builds path (b) from §26 -- a leaf permanently serving two DIFFERENT
compatible programme codes at once, extending leaf-sharing's same-code
multiplicity mechanism to different-but-compatible codes. Architect-declared
`co_locate` pairs (validated against interchangeable()'s S1-S4 bounds, no
transitive closure so the b3v chain problem can't recur), threaded through
graph.py's checks via a new leaf_codes() resolver and fitness.py's quality
terms (additive size, stricter-of-both width/proportion). Construction-time
only, gated behind `multi_use` (default OFF, bit-identical when off).
End-to-end A/B (20k evals x 3 seeds x 2 programmes) came back net negative:
harbor-house -4.0% but health-centre +24.5% worse (3/3 seeds), because
fusing different codes' shape targets via stricter-of-both can impose a
tighter joint constraint than either code needed alone, which the tightly-
packed health-centre programme can't absorb. Written up as DESIGN.md §33;
multi_use stays default OFF, no default-flip recommended.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
run_9gp_ab.sh never threaded a worker count through run_staged_search.py, so
every §12.3 arm ran at n_workers=1 (serial) — the one mode §12.4 already
proved byte-for-byte reproducible even before the completion-order
determinism fix (that bug is ProcessPoolExecutor as_completed-only).
Spot-checked empirically: same config run twice gave identical fail counts
at every checkpoint. Closes homemaker-py-h10 as confirmed-null without
re-spending the ~8 core-hours a full sweep re-run would cost.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
N=15 seeds, xyu's own ruin_recreate ON/OFF protocol, against a real 20-room
diverse programme instead of programme-house's duplicated-code sweep: 2.2%
mean-fails delta, p=0.40 two-sided — much weaker than xyu's own inconclusive
6.4%/p=0.059 reading at the same room count, and converging with
harbor-house's null-to-negative result instead. Closes the diversity-axis
gap xyu's larger-N pass could not reach; enable_ruin_recreate stays OFF on a
now-broader evidence base. Issue closed.
A small primary-care health centre: 19 distinct, individually-sized room
codes at n=20 room instances (only one deliberate duplication: two public
WCs), filling the gap between programme-house's duplicated-count sweep
sizes and harbor-house's out-of-range 37 real-diversity instances. Widths
are deliberately tiered (>1.3x gaps at three boundaries) so the auto-derived
interchange relation resolves to three bounded utility/office/clinical
classes instead of one whole-building chain, which a first pass produced.
experiments/run_9yx_sweep.sh repeats xyu's ruin_recreate ON/OFF protocol
(budget 3000, 4 workers, N=15 seeds) against this programme.
Extends y51's n=18 synthetic sweep (strongest of four sizes at N=10) to
N=15 seeds, matching f1d's own confirmation sample size. Effect shrank
(9.3%->6.4%, two-sided Wilcoxon p 0.098->0.059) but didn't evaporate or
reverse — an ambiguous middle case, not a clean confirm or null. Refiled
option (b) (non-synthetic third example programme) as homemaker-py-9yx
since extending N alone doesn't address the interchangeable-room-code
confound §24 already flagged. enable_ruin_recreate stays default OFF.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
N=15 driver.search sweep of construction_beam_width 1 vs 4 (protocol
identical to c94's original 5-seed run, DESIGN.md §29): 6W/4L/5T, mean
fails 57.0->56.6, Wilcoxon p=0.84. Excluding seed 2's outlier the mean
flips slightly negative (56.3->56.9), confirming the §29 5-seed
"improvement" was that one outlier. construction_beam_width stays
default 1 on confirmed rather than precautionary grounds. DESIGN.md §30.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
The raw-seed diagnostic (single constructed tree, byte-identical across
beam widths) was wrongly taken as proof a full driver.search run would
also be byte-identical. Actually running it (5 seeds/programme, budget
1500, n_workers=1) shows harbor-house diverges: 2 wins/1 loss/2 ties vs
greedy — a full bootstrap population hits beam-vs-greedy tie-breaks a
lone raw seed sample missed. programme-house stayed tied 5/5. Verdict
corrected from a confident null to inconclusive/mixed on harbor-house;
practical disposition unchanged (construction_beam_width stays default 1).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
operators._assign_adjacency_aware gains beam_width (default 1 = exact
prior greedy behaviour), threaded through constructive_topology/
lift_base_to_storeys/driver.search/search_staged as
construction_beam_width. Verified functioning on an adversarial
synthetic case, but byte-identical raw-seed output to greedy at every
width tested (1/4/8/20) on both example programmes -- no headroom for
the beam to find on this repo's programmes. DESIGN.md section 29.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R8agJBT2ZpmF3ErW7wi2wY
§25 still said the evolve.py wiring and broader sweep were pending on
homemaker-py-cdl; that closed in the previous commit, so update §25's
stale forward-references and add §28 with the 46-file sweep results and
the collapse_insearch hot-path reasoning for leaving collapse_global's
own default off.
homemaker-py-9wi's 2-opt adjacency polish (collapse_global's local_search
kwarg) was validated on harbor-house alone; this closes homemaker-py-cdl
by extending the A/B sweep to programme-house (34 more files, 46 total):
0 regressions, 2 improvements, rest identical.
collapse_global's own default stays False since it also runs every
fitness eval via collapse_insearch (qpk) on the unmerged tree, where the
2-opt pass would add cost to a hot path the sweep never measured.
Instead default it on at the two one-shot finish-time call sites:
homemaker-collapse --local-search, and a new homemaker-evolve
--collapse-local-search wired through driver.collapse_best's
**collapse_kw.
Two closed, substantive experiments were missing their DESIGN.md write-up
despite being referenced as prior art by later sections:
- 9o5/xi7/b3v (closed 2026-06-30/07-17): multi-use-leaf type superposition,
a full feature build + real A/B validation (negative — OFF beats ON on
both programme-house and harbor-house) + a veto-hatch follow-up for the
one genuine false-positive interchange class found. §17 and §20 both cite
its verdict directly but it never got its own section.
- mi7 (closed 2026-07-25): 3D bubble-diagram / topological-hop-distance
fitness signal prototype, tested against real evolved trajectories on two
programmes, both formulations null. bubble.py was left in the tree
uncommitted "as documented reference" by the closing session -- committing
it now (with two trivial ruff fixes: unused import, ambiguous var name) so
the reference this write-up makes to it is actually resolvable, plus a
CLAUDE.md module-list entry.
Numbered §26/§27 (appended, not inserted chronologically) to avoid
renumbering every cross-reference in §14-§25.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
The Jacobi adjacency relaxation in collapse_global (94g) re-solves a linear
assignment each round holding neighbours' labels fixed from the previous
round, which can 2-cycle between labellings that satisfy zero adjacency
requirements even when a fully-satisfying permutation exists (proved by
test_two_opt_polish_escapes_jacobi_plateau on a minimal 4-cell chain).
Fitness._two_opt_adjacency_polish runs after the Jacobi fixpoint and tries
swapping the labels of every same-level pair of supply leaves, keeping a
swap only on strict improvement -- monotone by construction. Gated behind
collapse_global(local_search=...) / homemaker-collapse --local-search,
default off pending a broader sweep (homemaker-py-cdl). Swept the 11
harbor-house evolved-*/3m/materialised .dom files: 0 regressions, 1 real
improvement (evolved-anneal-3M.dom 21->19 fails).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Locates the threshold f1d's programme-house/harbor-house split implied,
using four synthetic sizes (10/14/18/22 rooms) derived from programme-house
by scaling its bedroom+ensuite module count, since no natural third example
programme sits between the two. Results are noisy and non-monotonic (n=10
mild win, n=14 clean null, n=18 strongest trend at p=0.098, n=22 near-null)
rather than a clean decay with room count -- documented in DESIGN.md #24.
enable_ruin_recreate stays default OFF; filed homemaker-py-xyu as a
low-priority follow-up (larger-N at n=18, or a non-synthetic third example).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Adds operators.mutate_ruin_recreate: un-divides one wing of a storey and
rebuilds it with the same adjacency-aware constructor the seeders use
(_assign_adjacency_aware, generalised with a new `scope` param), seeded
from the surviving circulation bordering the wing. Gated behind
enable_ruin_recreate (default off) / --ruin-recreate, same pattern as
reassociate/bridge_circulation.
A/B (qpk protocol, DESIGN.md §23): initial uniform-weight run was
underpowered (fired ~1/32 children), null. A weight=3.0 follow-up
(_MUTATION_WEIGHTS["ruin_recreate"]) showed a statistically significant
win on programme-house across 15 seeds (8W/1L/6T, mean fails 7.07->6.00,
Wilcoxon p=0.041) but no consistent effect on harbor-house across 8 seeds
(3W/2L/3T). Kept default off pending a size-threshold follow-up.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Combined follow-up to 8sh (DESIGN.md §22): raised bridge_circulation's
_MUTATION_WEIGHTS entry to 2.0 (lj3) and re-ran the qi6/qpk-protocol A/B
at 4x the sample size (qjg) in one sweep, since the two variables were
confounded if tested separately. Result is null in the opposite direction
from 8sh's small-N signal -- no total-fail benefit (p=0.71 programme-house
N=20, p=0.69 harbor-house N=12) and a higher rate of trajectory-divergence
-induced new not-connected fails than at the original uniform weight.
Reverted the weight bump; enable_bridge_circulation stays default off.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GDZjAATDWW1xFfc7xnJqSt
Adds operators.mutate_bridge_circulation: retypes the cheapest path between
two disconnected circulation components to circulation, directly clearing a
'level N not connected' fail instead of relying on the qi6 graded comparator
key (measured negative, DESIGN.md §18). Gated off by default via
driver.search's enable_bridge_circulation flag and evolve.py
--bridge-circulation, mirroring enable_reassociate's clean-toggle pattern.
qi6/qpk-protocol A/B (DESIGN.md §21) is directionally positive but mixed at
N=3/N=5 (never worse on total fails; clears 2/5 baseline not-connected fails
vs qi6's 0/4; one seed's RNG-trajectory divergence adds 2 new not-connected
fails) — kept default off pending a larger-N confirmation sweep
(homemaker-py-qjg) and a mutation-weight bump experiment (homemaker-py-lj3).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GDZjAATDWW1xFfc7xnJqSt
20-seed programme-house sweep (vs the original 5) resolves the qpk A/B's
mixed 3/5 result as small-sample noise around a true small positive: mean
fails 7.95->7.10 (~10.7%), 11W/6L/3T, paired t-test p~0.028. Flips
collapse_insearch's default from OFF to ON in evolve.py and driver.py
(_overrides_for/_fitness_for/_evaluate/search/polish_finish); opt out with
--no-collapse-insearch. fitness.Fitness itself is unchanged.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GDZjAATDWW1xFfc7xnJqSt
161 (2026-07-22) answered the "remaining open question" §19 left dangling —
threading fit into driver.search so shape_rotate/deslim can fire mid-GA —
but the result only ever landed in bd notes, never here. Also negative:
full-budget harbor-house A/B (seeds 0-3) shows no improvement, confirming
the finish-time finding at in-search scale. Both halves of §19's mechanism
space are now closed negative in the doc, matching bd state.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GDZjAATDWW1xFfc7xnJqSt
conn_grade ON vs OFF (qpk protocol, experiments/run_qi6_ab.sh): harbor-house
(budget 2500, seeds 1-3) byte-identical output in every seed — the secondary
comparator key never fired. programme-house (budget 3000, seeds 1-5) 3/5 seeds
tie exactly; seeds 1/2 diverge to a different topology but the fail delta is
adjacency/crinkliness/width/access/size, never connectivity. Zero of 4 cases
where a not-connected fail was present got cleared by the grade.
Mechanism (b)/(c) (graded proximity as tertiary comparator key) is falsified,
not just unconfirmed. Kept default OFF (already was). Closed qi6; filed
homemaker-py-8sh for the remaining candidate (mechanism (a): an explicit
insert/relocate-circulation operator that doesn't depend on the search
stumbling onto a fail-count tie).
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GDZjAATDWW1xFfc7xnJqSt
driver.search()/search_staged() gain enable_shape_repair (default off),
mirroring the enable_reassociate clean-toggle pattern: only builds a
fitness.Fitness instance and passes it to operators.mutate() when
enabled, so shape_rotate/deslim (7fm) can actually be selected mid-GA
instead of always no-opping on fit=None.
Full A/B sweep (harbor-house, budget=1M, 4 seeds) shows no improvement:
mean fails 14.50 (off) vs 14.75 (on), within seed noise. Confirms 7fm's
finish-time finding at in-search scale — these operators don't rescue
harbor-house's residual fails even with GA selection pressure.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GDZjAATDWW1xFfc7xnJqSt
Runs the 94g finish-time cell↔room collapse inside every fitness eval
(collapse_insearch conf flag, default off, bit-identical when off) instead
of once at the end, so search optimises the collapsed objective directly.
Plumbed through fitness.py/driver.py/evolve.py the same way superpose/
conn_grade are; --collapse-insearch CLI flag.
A/B validated against the xi7 protocol (equal budget, both arms finished
with standard finish-time --collapse): POSITIVE, opposite of the 9o5/xi7
prior. harbor-house ON wins 3/3 (mean fails 80.3->72.0); programme-house
mixed 3/5 (mean fails 8.4->7.8). Kept default off pending a larger
programme-house sample; documented as a working opt-in for harbor-house-
scale-or-larger programmes. Full writeup in DESIGN.md §20.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Diagnosed the geometry-intrinsic residual from 94g's collapse: ratio
re-optimisation isn't the bottleneck (1500-eval NM makes zero difference on
the 12-fail collapsed best layout); the causes are upstream area starvation
and cut-orientation mismatch. Added mutate_shape_rotate/mutate_deslim
targeting each, gated on a Fitness instance like the existing reqs-gated
repair ops.
Evaluated as a finish-time exhaustive hill-climb on the same 6-layout
harbor-house sweep 94g used: zero improving moves found anywhere — every
candidate move traded the shape fail for a new adjacency/access fail on the
co-evolved layout (§4.2's lesson, now confirmed for topology repair). Closes
homemaker-py-7fm; spun homemaker-py-161 for the open in-search-GA question.
See DESIGN.md §19 for the full writeup.
The dominant post-collapse fail is the binary "level N not connected",
which is flat across fragmentation (a 7-component storey scores the same
as a 2-component one), so the outer search has no gradient toward
connected circulation. A finish-time convert-to-circulation repair was
prototyped and measured NEGATIVE (195->560 fails: bridging needed rooms
costs more missing-room fails than the one binary fail it clears).
Instead add graph.circulation_connectivity(G) = largest-circ-component
fraction, summed over storeys onto the score_with_grade proximity channel
(conf flag conn_grade; replaces the §11.4 leaf-grade there). It is a
secondary comparator key only — scalar fitness and fail count stay
byte-identical — restoring the gradient the binary fail lacks. Threaded
through driver (_overrides_for/_fitness_for/_evaluate/search; enabling it
implies the grade key) and evolve --conn-grade (default off).
A/B on full-budget runs pending; short smoke run confirms plumbing.
Tests: tests/test_conn_grade.py x9 (fraction contract, non-circ ignored,
monotone under (dis)connection, score/fail invariance); 276 pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M8566xAxTnwtJTkpXjYNZm
Document the collapse as built (default-on in evolve + homemaker-collapse CLI):
label-relative vs geometry-intrinsic fails, collapse_global mechanism (c/o/s
partition, hard level, adjacency relaxation, threshold objective, public-access
pin), the two measurement corrections, keep-better wrapper + wiring, and the
6-layout sweep verification. DESIGN.md is the system-of-record for users without
beads access.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M8566xAxTnwtJTkpXjYNZm
Public-access term (preserve_public_access, default on): when the building's
only street access is an l/k ROOM neighbour of a public outside leaf (no
circulation fallback — an existential building-level check the per-leaf
objective can't see), that leaf is pinned (kept, its demand slot decremented)
so the collapse can't drop "no outside public access". Best layout 15→13
becomes 15→12 with zero new fails; sweep total 172→171, still monotone.
collapse_finish(root, **kw) -> (tree, base, coll, applied): keep-better wrapper,
scores on throwaway copies (score_with_fails merges in place), returns the
collapse only if fails don't increase.
Wiring: driver.collapse_best updates result.best (lineage +collapse, canonical
re-score); evolve.py runs it after the sharing polish behind --collapse/
--no-collapse (default on). New homemaker-collapse CLI (collapse_cmd.py) applies
it to an existing .dom, writing <stem>.collapsed.dom.
tests/test_collapse_global.py: demand-set relabel, level hard constraint, c/o/s
exclusion, no-op safety, keep-better/unmerged. 267 pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M8566xAxTnwtJTkpXjYNZm
Add objective="quality"|"threshold" to collapse_global and make threshold
the finish-time default. The continuous-quality objective maximises
sum(usage_quality*area), which can trade one leaf just over the 0.1 fail
threshold for another just under (a fail SHUFFLE). The threshold objective
maximises the COUNT of passing size/width/proportion factors directly, with
continuous fit only as a tiebreak. A satisfied adjacency and a passing factor
share one weight (_COLLAPSE_FAIL_W) so both fail classes are minimised jointly.
Sweep over 6 harbor-house evolved layouts (total fails, base 195):
adj_off/quality 192 adj_on/quality 185 adj_off/thresh 181 adj_on/thresh 172
adj_on/threshold is monotone across all 6 (never worse than baseline), so it
is the new default. Residual on the best layout (15→13) is the building-level
"no outside public access" constraint, outside the per-leaf model.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M8566xAxTnwtJTkpXjYNZm
Global relabel of inside-room leaves via one optimal assignment over the
full leaf set — the 9o5 per-class collapse generalised to N leaves ↔ M
required rooms — as a one-shot finish-time polish on a committed layout.
Assignable room_codes exclude any starting c/o/s to match the scorer's
own partition (check_space_counts skips those; cr1/st1/st2 collide with
the circulation/structure convention). Hard level constraint via a -1e12
forbid penalty. Adjacency handled as an iterated relaxation: geometry is
fixed at finish time so each leaf's graph neighbours are fixed; warm-start
from evolved labels, each pass a linear assignment over quality + an
adjacency bonus (has_adjacency vs current labels), Jacobi to a fixpoint.
Measured (level+adjacency): best evolved layout 15→14 fails, rougher ones
32→28 and 90→83; adjacency-on beats adjacency-off everywhere (off regresses
the best layout +1). Substrate only — not wired into search or a CLI yet.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01M8566xAxTnwtJTkpXjYNZm
